DYSON AM08 PEDESTAL FAN HAS OPERATED FLAWLESSLY FOR TWO YEARS ! TODAY I STARTED IT , IT RAN AS USUAL THEN QUIT AFTER A MINUTE. I TRIED AND SEARCHED FOR A CAUSE FOR AN HOUR FOUND NOTHING UNUSUAL. WHAT COULD BE WRONG?

I have looked into my crystal ball but alas, cannot find the problem you refer to.
Please try again with a complete question.
Thank you.

To fix the F2 error on the Dyson AM08 Pedestal Cooling Fan, you must try resetting the fan by unplugging it from the power source for 2 to 3 minutes and then plugging it back in , it can work properly.

Call Dyson support, I do not have this answer and a search rendered no results

DYSON USA SUPPORT

Call us at 1-866-693-9766

brand new , take it in for a warranty check or a replacement / refund

Turn the power off and unplug the machine for 60 seconds. Plug the machine back in and turn power on. Repeat this process up to 3 times until the F4 error code has cleared.

Hi Dana, it's Jack at Dyson.

I'm sorry to hear you're having difficulty with your Dyson Cool AM08 Pedestal fan. If your machine displays an F6 error code I would strongly encourage you to contact Dyson directly, as we will need to provide further assistance to help you to resolve this.

When you have your machine easily to hand, please contact the Dyson Customer Helpline on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU). Our experts will be happy to take some additional details and advise you of your options.

We'll look forward to speaking with you.

check the ac blower transistor under passenger side of dash behind the blower motor. on my 2003 compressor would not cut on , front blower only operated on high an blew hot air, rear blew on all speed but only hot air. $58.00 at dealer plus tax. 15 minute fix. there is a video on youtube that documents the process. just fixed today

Go to this link and find the dealer local to you; http://hamptonbayinfo.com/Product.aspx?pid=9eb435cd-4f97-4074-bdf3-630f1efd7a83&cid=791075 They should be able to either supply parts or tell you where to get them. Hope this helps, sorry for the delay but there are more problems than experts available at the minute :)