Bobbin Thread won't come through

If your sewing machine's needle is not picking up the bobbin thread, there could be a few potential causes for this issue. Here are a few things you can try to troubleshoot the problem:

1. Check the bobbin case: Make sure that the bobbin case is correctly seated in the machine and that the bobbin is properly installed in the case. If the bobbin is not installed correctly, the needle may not be able to pick up the thread.
2. Check the thread tension: The tension of the thread in the bobbin case and the needle can affect the ability of the needle to pick up the bobbin thread. If the tension is too loose or too tight, it can cause the needle to skip the bobbin thread. You can adjust the tension by using the tension adjustment dial on the machine or by consulting the owner's manual for your specific model of sewing machine.
3. Check the needle: Make sure that the needle is properly installed and that it is not bent or damaged. If the needle is not seated correctly or is damaged, it may not be able to pick up the bobbin thread.
4. Check for other issues: There could be other issues with the sewing machine that are causing the problem

HI Elizabeth.
Found this on the internet.
There could be several things that could cause the machine not to pick up the bobbin thread.

• The upper thread could be tangled.
  Remove the thread completely from the machine.
  The correct size spool cap should be used for the size of the thread spool.
  Re-thread the machine according to the directions in the manual.

One Point Advice Place a spool of thread on a spool pin.
One Point Advice Upper threading

• Remove the bobbin and make sure the bobbin is threaded properly in the shuttle race.
  Remove any loose threads or lint in the shuttle race.

One Point Advice Installing a bobbin into a bobbin case

• You could be holding the needle thread too tight.
  Hold the thread lightly to keep the end from going down into the shuttle.
• The needle could be thread incorrectly.
  Thread the needle eye from the front to the back.
• The needle could be bent or improperly inserted.
  Install a new needle with the flat side of the needle facing the back.
• if this does not help you go to this link.

won pickup the bobbin thread Google Search

Hmmm, could be several things.
Try a brand new needle. Try a different brand of thread.
Remove the top thread from the machine. RAISE the presser foot and rethread from the beginning. Verify the thread path is correct.

If it still will not pick up the bobbin thread, the machine could be out of time.

hi Desiree.
this is all i could find out.
There could be several things that could cause the machine not to pick up the bobbin thread.

• The upper thread could be tangled.
  Remove the thread completely from the machine.
  The correct size spool cap should be used for the size of the thread spool.
  Re-thread the machine according to the directions in the manual.

One Point Advice Place a spool of thread on a spool pin.
One Point Advice Upper threading

• Remove the bobbin and make sure the bobbin is threaded properly in the shuttle race.
  Remove any loose threads or lint in the shuttle race.

One Point Advice Installing a bobbin into a bobbin case

• You could be holding the needle thread too tight.
  Hold the thread lightly to keep the end from going down into the shuttle.
• The needle could be thread incorrectly.
  Thread the needle eye from the front to the back.
• The needle could be bent or improperly inserted.
  Install a new needle with the flat side of the needle facing the back.

or this link might help you out some more.

Why won the machine pick up the bobbin thread Brother
or this one.
brother lx3817 sewing machine doesnt stitch Google Search

Try installing a brand new needle (verify it is installed correctly). If it still does not pick up the bobbin thread, the needle/hook may be out of time, requiring service.

Sewing Machine Needle Not Catching Thread

Sewing machine won pick up bobbin thread hook timing fix
//

First thing to always try: Install a brand new needle. A dull, worn, or bent needle will cause great frustration. It is also the least expensive resolution to most problems.

Second: Remove all the threads. RAISE the presser foot. Rethread from the beginning making sure it is threaded correctly.
Pull up the bobbin thread before beginning to stitch and hold the thread tails in the left hand while slowly taking the first few stitches:

How and Why to Bring up the Bobbin Thread

If still having issues with not pulling up the bobbin thread, the needle/hook may be out of time.

Sewing machine won pick up bobbin thread hook timing fix

...

Try installing a brand new needle.


Sewing machine won pick up bobbin thread hook timing fix

Sewing Machine Needle Not Catching Thread

Upper Thread will not pick up Bobbin Thread

Needle not picking up bobbin thread Threads Magazine Gatherings Forum...

...

try changing the needle
try rethreading the machine top and bobbin
make sure to use every thread guide-this is improtant for the
thread tension
make sure the bobbin is turned correctly in the bobbin case
also could be a problem with the computer motherboard
or there could be a problem with the timing

the bobbin case does not move, just the bobbin.. if the machine is still under warrenty, I would take it back & get another sewing machine,, and probably not from them

hi there.
this is all i could find.go to this link and see if it helps you out.
Bobbin thread won come up with top thread Google Search