Question about Cameras
Reviewing pictures on computer, day pictures look great, night pictures are black. Sensors must be working pictures are random times at night but pictures are just black
Pictures probably look black because there is no light at night. Camera need light to take photographs.
Posted on Sep 18, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Kodak C643 Screen black
One way out of the glare is to use the optical viewfinder (if your camera has one) to preview your image instead of the LCD. Another possibility is to buy a camera that has a backlit LCD.
Posted on Mar 09, 2008
OK. Since you have had so much trouble lets check the dealer for an updated software calibration for the PCM (power train control module). Once we're sure there is no "fix" here lets talk about "lean" engine conditions. Lean means one of two things are wrong with the air fuel mixture (ideally 14.7 parts air to 1 part fuel). 1. Too much air -or- 2. Not enough fuel. If you access to a scan tool we need to look at fuel trims. With the engine warm look at this data on the scan tool. You have a "bank 1" and "bank 2" fuel trim data. Additionally, each bank has a long term and a short term value. With the Engine hot and at idle add the LT and ST trim value for bank1 and write it down...do the same for bank2. Repeat this step, for EACH bank with engine at 2500 RPM in park (hold at 2500 for at least 30 seconds so trims update). Now, you have the total trim values for each bank at idle and at 2500 RPM. What should the values be? Total trim +/- 5 is good, +/- 10 borderline any thing greater is code setting territory. If trim numbers are high at idle and in range at 2500 rpm you have a vacum leak behind the mass air flow sensor. Or a faulty MAF. Pay particular attention to the air inlet hose clamps behind (between MAF and engine) the MAF. Also use ford parts only.
Posted on Nov 14, 2009
error 020000 relates to flash/flash charging...if new, take it back.I have repaired several by replacing the IR LED flash...easier fix than the incandescent units.
Posted on Jan 04, 2011
Tips for a great answer:
Sep 22, 2017 | Sony Computers & Internet
Mar 19, 2015 | Cameras
Nov 22, 2013 | Computers & Internet
Dec 13, 2009 | 2004 Jeep Grand Cherokee
Oct 17, 2009 | 2000 Jeep Grand Cherokee
Mar 28, 2009 | Canon PowerShot SD800 IS / IXUS 850 IS...
Oct 16, 2019 | Cameras
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: