I have a Canon D320 and it says install cartridge while the cartridge is in there. Do I just need a new cartridge? Thanks

The cartridge installation error is displayed on the Canon PC-D320 printer when the cartridges are not installed properly. Glance through the steps below to resolve the issue.

1) Power up the printer and remove the ink cartridge from the printer.

2) Shut off the printer and disconnect the power cord from the power source.
3) Reconnect the power cord to the printer and power source after a few seconds.
4) Load the ink cartridges into the printer again and wait until the initialization completes.
5 )If the error code appears again, repeat the above steps.
6) If you have installed the cartridges properly but are unable to print, the printer will display an error code.
7) Open the front cover on the printer and wait until the print head moves to the left.
8) shut off the printer and disconnect it from the power source.
9) Remove the ink cartridge by pressing the clips on the sides.
10) Remove the felt pads in the platen waste ink absorber under the ink cartridge holder.
11) Rinse the pads and dry them using paper towels. Reinstall the pads. Check if the issue is resolved.
12) If the printer displays error E4, replace the ink cartridges.
13) Reset the print system if the issue persists.

For more printer related assistance get in touch with our experts by just giving a call @ 1-866-293-9220.

Hello,
these looks like fixing film trouble.
Change the fixing film unit - call service!!

When your cartridge is not adjust properly.
install your old cartridge.If this massage again may be your machine .Right side drum charge lock not adjust.Or machine ready so problem on cartridge.
Cartridge part no T series toner cartridge SG 35 is appropriate model.

Try opening the right door and re-closing it to reset.

Also, be sure that your "new" cartridge is really new and not a low quality refill.

good luck

yes it is problem your copier machanical problem.if it is original cartridge this printer or cartridge problem

Dear sir
it is problem your printer machanical
please missing your right side spring lock is messing

i have a lot of quantity cartridge . open your copier front door and out the cartridge.Have your side any hp 1200 printer cartridge part no 15 change drum shatter put your old d320 cartridge then solve your problem
please send me success result

it is like as canon LBP 1210 or hp 1200,1000,1300

the toner cartridge is running low on toner and it needs to be replaced

I believe the toner Cartridge has a tab that works a switch when inserted into the machine. sometimes it gets broken.