Question about Health & Beauty

Open Question

PRIME SCALE PS-IN202 ALARM GOES OFF WHEN YOU TURN IT ON AND STAYS ON. DISPLAY SHOWS 8.8.8.8.8.8

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Alarm light on, Display indicates error message: Check Ink U150 M

I added my post today with the same problem, and thought I'd share what I since learned. Apparently this "Alarm light/U150" is common with several Canon models. The U150 indicates a faulty electronic chip (on the ink cartridge). Though I tried cleaning the sensor with isopropyl alcohol, and also tried removing all the cartridges, unplugging the printer for 45 seconds, then reconnecting,etc. as I had read might help, I still had the same frustrating problem. Contacting Canon was the solution that worked for me. First I emailed, but decided I didn't want to wait for their response. A call to Canon Tech Support (1-800-385-2155) was quick and painless. They will more than likely send you a new cartridge, but you'll need to have your serial # & date of purchase handy.

Posted on Dec 11, 2007

Ad
whitefalcon7
  • 1 Answer

SOURCE: Is my scale calibrated. When I turn it on it first shows 8888 7/8, then it 0/0g

Take a ten pound bag of sugar and calibrate the scale to read 10 pounds.

Posted on Oct 30, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant change the time on the alarms


Helped over 100,000 people on Fixya and never got paid Fixya are

Feb 28, 2018 | The Audio Players & Recorders

1 Answer

Is my scale calibrated. When I turn it on it first shows 8888 7/8, then it 0/0g


Take a ten pound bag of sugar and calibrate the scale to read 10 pounds.

Oct 30, 2014 | Salter 3007 Aquatronic Digital Scale

1 Answer

Tv wont boot up


This is a prime case of bad capacitors in power supply. You may have only had it a year but how old are the parts that are in it?

Oct 30, 2017 | Televison & Video

1 Answer

How to set alarm time on bose wave radio


To set the Alarm 1 time - On the control panel, hold down ALARM
SET and press TUNING up or down. The time display changes slowly at
first, then more quickly. Release TUNING to stop.
On the remote, press TIME. The ALARM indicator flashes. Press
TUNING up or down. The time display changes slowly at first, then
more quickly. Release TUNING to stop. Press TIME to return the display
to the current time.
To turn on the Alarm 1 function - Press ALARM MODE or
ALARM in sequence to select the mode you want: tone, radio,
both tone and radio, or off.
For tone only, press until the indicator lights.
For radio only, press until the indicator lights.
For tone and radio, press until both indicators light. When the
alarm goes off, the tone sounds. Press SLEEP/SNOOZE to turn the
radio on. Press SLEEP/SNOOZE to pause the radio for 10 minutes.
To turn off the Alarm 1 function - Press ALARM MODE or
ALARM until the display shows no Alarm 1 mode indicators.
To check the Alarm 1 setting - On the control panel, hold down
ALARM SET to see the wakeup time.
On the remote, press TIME to see the wakeup time. Press TIME again to
return the display to current time.
To wake to a preselected radio station with Alarm 1 - While
holding ALARM SET, press the PRESET button for the station you want
(change between AM and FM if needed).

Dec 02, 2010 | Bose Wave radio/CD remote control -...

1 Answer

I have lost the operating manual for a technika DAB 109 Radio


I HAS SAME PROBLEM BUT FOUND THE ANSWER. PRESS STANDBY AND TURN UNIT ON, THEN PRESS ALARM BUTTON, DISPLAY SHOWS ALARM 1, PRESS SELECT BUTTON DISPLAY SHOWS FM/DAB/BUZZ, PRESS LEFT/RIGHT BUTTONS TO SWITCH BETWEEN WAKE UP OPTIONS, THEN PRESS SELECT AGAIN, DISPLAY SHOWS OFF, PRESS LEFT/RIGHT BUTTON TO TOGGLE BETWEEN ON/OFF LEAVE 'ON' SHOWING, PRESS SELECT AGAIN DISPLAY WILL SHOW ALARM TIME, USE LEFT/RIGHT TO SET HOUR THEN PRERSS SELECT, USE LEFT/RIGHT TO SET MINUTES TEHM PRESS SELECT AGAIN, DISPLAY WILL NOW SHOW SMALL ALARM CLOCK IN DISPLAY WINDOW, THIS MEANS ALARM IS NOW SET.

Mar 07, 2010 | Audio Players & Recorders

1 Answer

Nothing will display on the read out


The following reset procedure is used when the scale shows an err2, err, 0.0, inaccurate weight, or some other unusual error.
  1. Remove the battery from the scale.
  2. Sit the scale on a hard surface floor.
  3. Step up onto the scale, stand still for about 5 seconds and step off the scale.
  4. Re-install your battery.
  5. Place the scale back on a hard surface floor.
  6. With one foot only, place just enough weight on the scale for the display shows zero’s or dashes. Once you see zeros or dashes remove your foot.
  7. Wait for the scale to turn off again.
  8. Step up onto the scale for a weight.
If the reset is successful, you should receive a weight right away. If you continue to receive one of the error messages above please call our Customer Service department or contact us via email. You can also try the reset procedure a 2nd time. Sometimes the reset procedure will work the second time.

Jan 03, 2010 | Taylor Dgtl Body Fat Scale

1 Answer

HealthSmart bathroom scale displays "Err"


Put scale in round file can. Buy another cheap scale.

Oct 03, 2009 | Dmm Elscale Healthsmart Glass Electronic...

4 Answers

How to calibrate a Pelouze model 4010 scale with a


when i turn on my 4010.the screen display shows 4010 but thats all it does.any solution.

Jul 08, 2009 | RTO Pelouze Scale With Remote Display -...

1 Answer

PELOUZE 4010 SCALE READOUT FAILED


my pelouse when i turn it on it stays on 0.0 when i put weight on it stays on 0.0 it then goes of i need help to get it to work

Jan 28, 2009 | Office Equipment & Supplies

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1389 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Jeff Tilburn
Jeff Tilburn

Level 3 Expert

1336 Answers

Are you a Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...