Watch still not working with a new Renata CR1225 Lithium Battey

Fossil Watch Battery Replacement - Ultimate Size Guide -

batterymole.com https://batterymole.com > fossil-watch-battery-replace...
Aug 21, 2022 - The CR2430 battery is a 3v lithium battery, see the shape below. This example is made by Renata, but you can also get the produced by Duracell, ...

I can't find much on the watch. Sweda is one company, and Lifeline is another.

https://www.google.com/search?q=Sweda+Lifeline+watch

Look inside the watch and look for an engraved number near the battery socket. If nothing there, a local jeweler will have a battery that fits the space. Voltage is 1.55 volts, silver oxide are best.

Watch Battery Size Chart - 377 Watch Battery Replacement
Ad·https://www.microbattery.com/watchbatteries
For batteries at low prices, shop Microbattery for high quality watch battery replacements. Watch batteries from the top manufacturers like Murata, Renata, Energizer, and Seizeken.
‎Changing Watch Batteries · ‎364 Watch Batteries · ‎Closeout · ‎Browse All Watch Straps

..

If you have the old battery make/number try the main battery manufacturers or retailer websites (such as Renata) who have compatibility tables for most makes and models. Alternatively try a wholesaler such as Cousins (in the UK) as they stock a wide range of batteries. Remember there are often postal restrictions on batteries so check shipping costs before ordering.

Hi. I´ve got a ph-1030 and it works with a `RENATA 350`. I couldn`t d this reference so I bought a similar one.I got the `SR1130W` . This battery works but you have to place an small tape on the back (negative pole), to insolate the battery. You have to do it because this battery is a litle bite smaller than the renata 350. If you need anything else email to [email protected]

Renata CR1632
http://www.renata.com/pdf/3vlithium/CR1632_v06.pdf
To replace battery you need to have very small screwdriver and some knife to open back cover. 

You need to hold in reset and mode to make it go back on.

I contacted the manufacturer. You remove the crown, then use tiny attachment to a bike pump to push air into the interior of the watch. This will cause the crystal and dial to come apart. Viola!

Could be a duff battery - this does happen - even to duracell.

Try another battery - try and get a renata as was originally in the watch. Luminox usually use the Ronda swiss movement - which are pretty bulletproof movements. (i've got 2 Luminox - nice watches, prefer these of trasers)

If you don't get any joy with another new battery - send to the recommended sevice / repairer on Luminox website - prices are not that bad and you can specifiy exactly what you want done so it should not cost the earth - all prices are there to see.

US
Luminox Service Center
1024 Reservoir Avenue
Cranston, RI, 02910
P-401-946-0930
Toll Free-888-61-WATCH
[email protected]

UK
Luminox Service Centre
Unit 11, NCR Buisness Centre
400 North Circular Road
London NW10 0AB


1) A brief explanation of the problem(s) that you are having
2) Your name
3) Your return address
4) Your email address
5) Contact telephone number
6) Your guarantee card (or proof of purchase)

Hope this helps

I had the same problem. My jeweler came up with a solution. He "dibbled" the rear of the case just enough that the next smaller Renata battery would fit. You can't tell that he did anything but it worked. Hope this helps.

CTL is the designation for a rechargeable secondary battery. The CR is a primary disposable battery and is a 3 volt cell. The CTL1616 while the same size as the CR1616 function completely differently and are not interchangeable. The CTL1616 is 2.3 volts and is recharged by solar or light or kinetic movement. The CR1616 is 3 volts is not rechargeable and will not function properly in a time piece designed for a 2.3 volt circuit. There is only one manufacturer of the CTL1616, Panasonic and they sell through Casio parts distribution.