- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds that, its main system control memory IC is fault. It do not store the tuned station data. Contact any service technician. In most cases, this IC might be need replaced or its initial setting data should be adjusted. If
you're sound in electronics, and wish to get more details, check this
link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic
/ Flip card, can be selected by the drop-down list, by the top left
of the display window, will make surf easy. You can also do a search, by type in the brand name / model
number / IC used, in the search box at the top right of the display window.
I have the drivers and real manual with error codes.The manual link above is just a brochure. I can forward email with files and answer about errors. Keep in mind that the ic-1000 controller does all the color corrections etc for you. From a PC I found photoshop is helpful, the quality just wasn't the same as the ic-1000 controller.
1. Electronically Erasibale Programmable Read Only Memory Programer 840 pounds minimum for a decent one. 2. Digitally Controlled Interfered Re-Work Station 3740 pounds 3. Computer Aided Design Software 1000 pounds + 4. Computer Aided Manufacture Software 1000 pounds + 5. Specialist Micro Electronics Tools 130 pounds 6. Specialist Digital Systems Tool Kit 322 pounds
You need to first remove 3 IC controllers from the motherboard using the Re-Work station, than insert them in to the EEPROM Programer and reprogram them using the software that cam with it. DO NOT touch these IC's as 1 spec of dust on a pin and they will never work again unless you have Concentrated Sulfuric Acid and Acetone which you you can mix for 12hours in a sealed high pressure chamber with argon (I doubt), or you could spend 4000 pounds sending the IC's off to be cleaned (not likely when you can buy them for 16 pound.
Hello If the set receives FM signals without any problem, and only fails to receive AM signals, the IC [integrated circuit] used in it is faulty. The number of the IC used with your radio is CXA 1376AS. It is a replacable type IC, and can be bought from most of the electronic spare part shops at your town. If you want further details about its service manual, get me by Fixya. OK.
My Epson CX 5800 Printer is not printing any thing green. Where there should be green or blue there is red. The ink ck showes ink in all 4. What gives?
Because you don't have the controller you will need to purchase a SCSI-II card for the PC and connect it with a cable. D-sub 25pinx2 cable. You can get a card like maybe an Adaptec aha2930 and you can use a DB 25pin serial cable to connect the two. you will probably need male-male.
×