Hi you can try this.
To reset waste tank full error in MP730.
1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button
Can only try then your printer go on longer but some time the other you will need to clean out the waste ink it inside the printer all got to be open up to do this.
Ok I have put a MP-Tools in my website for you to try out this tools are for reseting your inks plus it can do much more.
Click on the link to download it.
Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
I have the same problem listed in this post.
I tried to follow your steps listed above and it all goes well until "5. Hit the "3" button - this will bring up the Eprom Clear"
When I hit the "3" button it says Please wait and then "3: Print - [1] - [9]
Your help is the best so far, and it seems like MANY people have this problem so I'd sure appreciate your further attention.
Thank you.
×
730 views
Usually answered in minutes!
×