How to install latch and spring in microwave door

This appears to be an Australian model and these are the only spares I can find. They do sell the latches. If the hinges are damaged and causing this, you will feel movement. Looks like it is time for a new one.

https://spares.bigwarehouse.com.au/index.php?cPath=46427_53341_57047

https://www.google.com/search?q=sharp+R-9X56+replacement+hinges

..

If you gently push up on the door latch heads (hook-like devices sticking out of the door) there should be spring tension. If they just flop right up, the spring is off inside.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

The service manual for the R-408LS (the model you posted it under) is here.

You can order parts from the Sears Parts Direct Web site.

If it has the "double hook" type latch on the door,see if the hooks slide up and down.They should be spring loaded,if not,the spring attachment point inside the door may have broken off(my Sharp Carousel did this).I pryed the plastic door trim loose,and reattached the spring by using one of the slots inside to hold a metal wire clip(modified with needle-nose pliers) to hook the spring onto.Your door's design may be a little different,but a similar solution will probably be apparent after you get in there.

You have to lift door off pins. Use a flat head screw driver to pry inner panel of door to get to latch.

If you gently push up on the door latch heads (hook-like devices sticking out of the door) there should be spring tension. If they just flop right up, the spring is off inside.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

You can find links to helpful exploded view diagrams and part ordering help here.

I recommend that you bookmark that link to your favorites.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.



Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

You can usually find exploded views and order parts by entering your model number at the Sears parts site.

But the best place to order Sharp parts is Encompass or you can call them at

If you need to remove it form the wall, here are two sets of installation instructions that may be close enough. here and here

If the unit needs to be replaced, you can ask Sharp if they have a "drop in" replacement. You can contact Sharp at 1-800-BE-SHARP (1-800-237-4277) or visit them online.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

If you gently push up on the door latches (hook-like devices on the door) there should be spring tension. If they just flop right up, the internal spring is off.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here but the best place to order Sharp parts is Tritronics.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

Actually, the door latch head (hooklike device) is pretty easy to replace or repair if that's the issue.

If you gently push up on the door latches (hook-like devices on the door) there should be spring tension. If they just flop right up, the spring is off.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

You can usually find exploded views and order parts by entering your model number here at the Sears parts site.

The best place to order Sharp parts is Tritronics.

We have critical safety & disassembly info at our site, linked here.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

We have the service manual for this model and have uploaded it to our site here to help you.

You will need the free Acrobat Reader to view or print it.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

If needed, the best place to order Sharp parts is Tritronics.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

If you gently push up on the door latches (hook-like devices on the door) there should be spring tension. If they just flop right up, the spring is off.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

We have the service manual for this model and have uploaded it to our site here to help you. You will need the free Adobe Reader to view or print it.

To get into the door, normally you have to separate the door panels (as shown in the attached photo) and then you'll see the previously hidden screws you need to remove.

The manual shows that, or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

The best place to order Sharp parts is Tritronics.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

We have *critical* safety & disassembly info at our site, linked here: http://tinyurl.com/yzjozk

We also have this full service manual at our site: http://www.microwavedisplay.com/R1480_R1481_R1482_sm.pdf

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

We're happy to help and we appreciate your thoughtful rating of our answer.