Vocalist 3 power keeps turning off for no reason

Page 76, ask them by phone

8760 South Sandy Parkway Sandy, Utah 84070
PH (801) 566-8800
FAX (801) 566-7005

https://www.digitech.com/on/demandware.static/-/Sites-masterCatalog_Harman/default/dw8ae9c833/pdfs/Vocalist_Live_FX_Manual_5047142-B_original.pdf

..

Yes it is so is every other effect you will have to plug the reciever of your wireless mic system in to the vocalist and the out of the vocalist to your mixer or amp

The only guitar amp that has 2 female jacks, one xlr and one 1/4" is a tall Acoustisonic anp by Fender . I have one and I use the Vocalist 3 and I still have an instrument jack for my acoustic guitar . hope this helps .

If the mic is a low Z- mic, that might be the issue. Check the mic straight into the sound card of the mac and see if it works or if it is shorted. Is there a switchon the mic? it may be dirty.

U.S and Canada: 20 VAC, 60 Hz Adapter: PS093B-20
Japan: 00 VAC, 50/60 Hz Adapter: PS093B-00
Europe: 230 VAC, 50 Hz Adapter: PS093B-230
UK: 240 VAC, 50 Hz Adapter: PS093B-240

Power adapter requirement straight from the user manual. I am sure you are aware that a simple plug adapter in a tourist shop does nothing to convert 120v US to 240v AUS. Note you unit does not like temperatures above 40C. And you can get that in Australia.

Bear in mind the timezone difference if you try Digitech support in the US.

DIGITECH VOCALIST LIVE 4 Owner Manual Page 36

A common problem is that somebody has paired the WRONG power adapter to this unit.

The REQUIRED adapter should be 9VAC (not DC) at 1300ma or 1.3 amps.

Note that UNIVERSAL replacement adapters will NOT work with the Vocalist.

NO power light or audio from Digitech Vocalist 2 live. Check that your power adapter is for 9 Volts AC (not DC like most pedals) and is rated at 1300ma or more. A DC adapter MAY light up the unit but not make it pass audio. Lights can be lit but that is NOT an indication thaat correct power is applied. They likely use the AC input to generate both positive and negative voltage within the unit. The use of a DC adapter will prevent generating one of these required voltages and prevent audio from passing.

Check that your power adapter is for 9 Volts AC (not DC like most pedals) and is rated at 1300ma or more.

To the guy with the vocalist live 3. You need to change the FS (footswitch) setting under setup. It toggles between a true switch and working only when you hold it down.

Make sure the replacement power supply was EXACT same ratings and polarity.