I am having trouble connecting my iPad to my Dax-660 blutooth

Does the DVR have Blutooth? if not you can't do it.

Check your batteries in the Coverbot to make sure they are fresh. Next, make sure the Bluetooth is turned on within the iPad. Make sure the Coverbot is turned on. Click on the "Search for devices " in the Blutooth menu on the iPad. When you see your Coverbot come up, click on "Connect".
Attached is a Coverbot Youtube video, it may be of help to you. Also, attached are the directions from Coverbot. Good luck!

i have the same problem & the same DAX remote control. and i can't find anything. It's like this DAX xompany does not exist!!!

which bluetooth device mobile ph Ipad iphone navigator.??????.......
first connect the blutooth device then you must turn on the make this active/dicoverable or and search for any bluetooth devices in both the bluetooth device and your computer the blutooth device should automatically search for any devices or you might have to do it manually click start click on my computer you will see your c:drive cd/dvd drives and any usb drives and you might see your bluetooth device

http://download.cnet.com/%7Bvalue=http://www.download.com/bluetooth-driver-ver-5/3000-2110_4-149801.html

to suit multiple usb devices
· Operating system: Windows 95/98/2000/XP/2003/NT/XP 32-bit/AMD 64-bit/2003 32-bit/AMD 64-bit
hope this helps

iPad and iPhone have some limitations regarding bluetooth connectivity. I believe you will need an external application depending what do you want to do.

I recently got this router and had trouble keeping a wireless connection to my ipad. On the router, I set up security with wpa2/psk and set a password and was able to enter that password on the ipad and got a connection but only briefly. After repeated losses of connection, I took encryption off and now it works fine. This is a terrible solution though and eventually want to get encryption back on .

i forger my dax router password , how does it break.

Adjust the valves

The 2 wire Home Portal 100w is a Modem/Router combination with wireless. But it has only one LAN port. So I understand that you are trying to use a DAX router for extending the number or ports. The reason they may not communicate if 2wire LAN is connected to DAX WAN is both may have same IP address. If the router has similar IP on WAN and LAN, it will not communicate. For that changing DAX router's LAN IP will be a solution or you can do LAN to LAN cascading. Connect 2Wire LAN to DAX LAN and dont use the WAN port. This way you dont have to change anything in the configuration

I have the same problem with a Blackberry 8100 (Pearl). Worked fine before the upgrade. The only solution seems to be disabling the Blutooth on the Garmin and then reenabling it when the BB Pearl is in range.