Question about Exercise & Fitness

Open Question

E2 error rectification for treadmill

Treadmill shows error during countdown timer and motor does not rotate.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: E2 error codes shows on my Pro Form 730 si treadmill

Did you find a solution for this issue? I have a similar situation

Posted on Oct 14, 2009

Ad
  • 6 Answers

SOURCE: Treadmill incline error

Try this, it fixed it for me, if it doesn't work let me know
http://www.youtube.com/watch?v=MIIxoPtvhy8

I bought a used Precor 9.4 treadmill, but the incline adjustment was not working.
So, I did the following.
1. Turn off, unplug the treadmill and wait for an hour (this is for safety
2. Remove the black motor cover
3. Observe the transformer to the right of the motor and towards the belt ( I point to it in the video)
This transformer converts DC electricity to AC electricity and the AC current goes directly to the Incline motor which is in the black box towards the front of the machine.
4. On mine the wires had come loose from the transformer, they were soldered on very poorly, the wires are stiff and you should be able to see 4 wires coming from the top of the circuit board and plugging into the transformer, I had three of the 4 wires loose.
5. If you are not comfortable working with electronics or soldering DO NOT DO THIS REPAIR, you could get shocked very badly if you just go poking around in there with metal objects, get a friend who knows how to solder or hire someone.

6. It took about 5 minutes I just heated up my $10 soldering gun from radio shack and soldered all the loose wires that were about a millimeter away from the tabs on the back of the transformer, and VOILA! The incline now works!

Posted on Mar 25, 2010

bwinton
  • 83 Answers

SOURCE: Lifefitness TR 9000 treadmill - 1997 model

Because you are hearing the lift motor making a noise, it sounds like the gears in the motor are bad. The fix is to replace the lift motor.

Posted on Apr 29, 2010

maxtreadmill
  • 832 Answers

SOURCE: E2 Code on Treadmill after starting

This is a speed sensor error. Unplug the unit then remove the motor shroud locate the power board with LED lights plug in unit locate the 5v DC if this is on then replace the speed sensor.The sensor is located on the frame by the front roller pulley or on the Drive Motor itself. Call IconFitness @ 1800-999-3756.

Posted on Jun 27, 2010

  • 33 Answers

SOURCE: my sole f63 treadmill shows an elevation error and

pls do re-calibration

Posted on Dec 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix a lifegear treadmill 97520?


Try below:

ERROR CODE
DESCRIPTION
E1
Speed error (The treadmill running speed is 3.2 kph faster than the displayed
speed). The treadmill will stop immediately when the console detects this error.
E2
Speed error (The treadmill running speed is 3.2 kph slower than the displayed
speed). The treadmill will stop 16 seconds later after the console detects this
error.
Troubleshooting / Resetting error codes
In the rare event of the treadmill displaying an error code ("E" followed by a number), simply reset
the computer by:
1. Step off the treadmill. Ensure that you are clear of the running belt.
2. Turn the treadmill off at the master power switch located near the motor housing.
WARNING: Ensure nothing is positioned near or under running belt which may possibly block
it's normal operation.
3. Turn the treadmill on at the master power switch.
4. Ensure that the Safety Tether Key is securely and properly installed onto the console or just
reinstalling the Safety Tether Key can also reset the display.
If the above does not clear the error code, please contact the nearest Dealer/Service Center

LifeGear 97320 Owner Manual Page 17

May 22, 2016 | Exercise & Fitness

1 Answer

Haw to sat intermatic ff12h timer spring wound


Rotate the dial clockwise, and let go... the will activate the countdown
http://waterheatertimer.org/Countdown-timer-horsepower-ratings.html#ff

gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Jan 08, 2014 | Intermatic Hardware & Accessories

1 Answer

Carl lewis mot566 treadmill error code e03


please adjust the REED switch, see the diagram attached. Clean it +test it for open or faulty+tight the connector very well.

However if the problem persist error code 3, this is a problem with the PCA memory location, RAM. the solution is to replace the PCA.

Try to RUN the software calibration for easy diagnostic, and fix it

God bless you

Jun 22, 2013 | Exercise & Fitness

1 Answer

Sierra motorized treadmill with e2 code error


E02" You may not have enough voltage going to the machine. Turn the machine off and on
again at the switch at the rear of the treadmill. If this does not fix the problem you may have lower board problem see the diagrams attached and fix it.
God bless you2_4_2013_6_08_21_pm.jpg2_4_2013_6_09_23_pm.png2_4_2013_6_09_37_pm.gif

Feb 04, 2013 | Exercise & Fitness

1 Answer

E2 error code on my Tempo 612T treadmill


adjust and clean the speed sensor, and tight the connector very well, see the diagram
2) test the input voltage motor, if there are voltage the motor replace
3) test the output voltage board, if there are NOT voltage , the board is faulty, replace.
God bless you
11_12_2012_4_06_48_am.gif

Nov 11, 2012 | Exercise & Fitness

1 Answer

My Exerpeutic TF1000 treadmill shows a E2 error, motor will not start.


see this steps and fix it.God bless you
This is probably a 1( faulty speed sensor, adjust it , clean it and tigh the plug very well see the diagram attached. 2( test the input voltage motor, if there are the motor need repair 3( test the output voltage board, for input voltage motor, if there are NOT the board is faulty see the block diagram . The error codes will differ between makes and models but could be e1. or e2
Run the software calibration for easy diagnostic, troubleshooting, and fix it.
God bless you
10_2_2012_10_07_50_am.gif10_2_2012_10_08_13_am.gif10_2_2012_10_08_36_am.gif

Oct 01, 2012 | Ironman Exerpeutic TF1000 Walk to Fitness...

2 Answers

How do i fix an e2 error and get a wiring diagram


Dear Sir:


I will try to help you, please be patience and carefully, use basics tools:screwdriver, hex,allen, Dvom.


Troubleshooting: ERR2 - Motor Movement

Since the motor moves when you press speed up, focus on the optic sensor, its wire connections, and the

optic sensor wheel. If all seems well at the sensor, inspect the motor.

Optic Sensor

??? Optic sensor wheel - Make sure that the optic sensor wheel rotates securely, without wobbling, in the

middle of the optic sensor. Realign and tighten if necessary. If optic sensor wheel teeth are missing or

bent, replace the optic sensor wheel.

??? Optic sensor wires - Make sure that wires are inserted securely to the optic sensor and to the drive board.

Check wire continuity.

??? Optic sensor - Turn on unit power. Turn the motor flywheel with your hand. The optic sensor

indicator (LED10, drive board) should light. . If it does not light, and all parts above are

good, replace the optic sensor.

Motor

??? Motor arcing - Does the motor show signs of wear - irregular arcing, carbon dust?

??? Motor brushes - Do brushes show signs of irregular wear - cracks, dents, lines? Replace the

motor brushes.

??? M+ M- Wires - Make sure wires are connected properly.

Other

??? Display main IC - To ensure proper signal processing, press down on the main IC on the display

board, marked U5. .

??? Ribbon cable - Ensure that the ribbon cable is attached at the drive and display boards. Check cable
continuity.

If you need additional help, please reach me.

sincerely. God bless you.

E.CUADR
MANAGUA, NICARAGUA

Oct 21, 2011 | Proform 730 Folding Treadmill Model...

1 Answer

Having a hard time "setting" it to turn on/off


Question is not clear: Add a comment for more information.
1) Did timer work before and stop working?
If timer stopped working, then buy another one for $15.

2) Is this a new timer?
Is the wiring correct?
Does the on-off switch turn load on and off?

GE 15068 is countdown timer.
Following link has a photo showing example timer:
http://ecx.images-amazon.com/images/I/311ev7wNxkL._SL500_AA300_.jpg
To operate countdown functions, move slide switch to Timer.
Rotate dial to one of the numbers shown on dial, for example 15.
Timer will turn on Load.
Timer begins counting down for 15 minutes.
When countdown expires, load turns off.

Jun 17, 2011 | Jasco Products 15068 White 30 Minute Wall...

1 Answer

Despite the fans working on a plain Jane single pole switches, I can't get these 6515M switches to work for my 1.3 ceiling fans. The fan hums and all I get on the timers are red LEDs. These timers...


1) Leviton 6515 is incandescent only:
http://www.amazon.com/Leviton-6515M-I-2-5-10-15-Electronic-Incandescent/dp/B0007NOZDI

2) Below is list of countdown timers with horsepower rating so they work for fans:

GE15088 countdown timer is rated 3/4 hp
http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay

Intermatic spring wound countdown timers are rated for 2 horsepower
http://www.intermatic.com/products/timers/in-wall%20timers/decorator%20spring%20wound%20timers.aspx

Woods spring-wound countdown timer says bath/ ceiling fans, but doesn't give horsepower
http://waterheatertimer.org/pdf/Wood-59700-series--spring-wound.pdf
http://waterheatertimer.org/Woods-timers-and-manuals.html#countdown

Woods push-button countdown is 1/4 horsepower
http://www.amazon.com/Woods-59014-Decora-12-8-4-2-12-Hour/dp/B002C54GH4

Wattstopper RT50 at Grainger shows 1/6 horsepower rating
http://www.grainger.com/Grainger/WATT-STOPPER-Time-Switch-2HTE1?Pid=search


3) Following timers are NOT rated for fans:

Lutron MA-T51 countdown timer specifically says it cannot be used for motors.
http://www.amazon.com/Lutron-MA-T51-WH-Maestro-Countdown-Timer/dp/B001EFV1DA
http://www.lutron.com/TechnicalDocumentLibrary/0301041A.pdf

Pass and Seymour RT1 countdown does not show rating for horsepower, so this timer will probably not work for fan motor
http://www.homedepot.com/Electrical/h_d1/N-5yc1vZ1xg8Zarcd/

Feb 26, 2011 | Leviton 6515M-W Timer Switch, 2-5-10-15...

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Tom Chichester

Level 3 Expert

54195 Answers

ray gallant
ray gallant

Level 3 Expert

64259 Answers

Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...