Will not turn on. after a power outage.

You need a service call.

You can try unplugging it and reconnecting quickly to give it a jolt.

check the condenser and freon

Your poker account has been disabled.

If you believe this is an error, please contact customer support to request reactivation.

Is your power light blinking,If it is it went in to what they call the protection mode,Apower surge will cauase them to do that, If that has happen ,What they call the power board has to be replaced.

hi you will need first to isolate where the problem might be so try to plug other unit or device in your power surge like a dvd player. if it is work your lcd tv have problem now how are you going to fix your tv, use a philip screw driver and open the back cover to gain access the internal part. since doesn't turn on check the power supply first which is the main source of supply of all the board. replace blown fuse and other defective part. bulged capacitor will not work good replace it use the panasonic brand atleast 105c ratings it is effective. thanks hope will help you to fix the problem.

Hello

Since the problem occured after a power outage,you should try resetting the H code.

Press CLEAR, EXPOSURE MODE, CLEAR, EXPOSURE MODE. The display should go blank. Then enter 14 with the copy count keys and press START. If the machine does not turn off and back on by itself - then turn it Off and back on. See if the H code should vanish and your copier should work well.

if u have a power supply that has an on/off switch on the back of it turn it off for about 30 sec. then back on then try to turn the computer back on.If that doesnt then you will have to clear the bios.

look on the inside of the toe kick at front bottom or just inside front bottom and you will find a tech sheet that will give you error codes.

Your machine is set to "Announce" instead of "Answer" mode. The announce mode merely plays an outgoing message but does not record any incoming messages.

Since you neglected to specify the model of your VTech 5.8GHz cordless system I can only suggest you enter it into the search box here to download a copy of the manual to learn how to switch modes.

Hi there!

Power outages and lightning are the main causes of Electronic failure. It has obviously affected your TV and will need to be seen to by a repair technician if you are not skilled to do so. Regards and good luck, JUS004