My P2 is not recognized by the computer

You need to install the dock software: http://www.randmcnally.com/support/s/dock-software. Just find the one that will work for your computer.

what message do you get when you try to connect to the wi-fi?

In YP-P2 Manual it says: If you forgot your Lock password, connect to a PC and run the EmoDio and reset the password in <myEmoDio>. For further information, refer to <EmoDio>
If you search emidio it doesnt exist anymore so pls use the steps: 1. Go to samsung.com 2. Click product registration 3. Follow the procedure and register your product 4. Make sure your media player is connected in the computer when you do this. 5. After that you can reset your password. Hope this helps!

i can not connect my PY-P2 to my computer i charges but dosen't connect to media player.

hello there
first you conect the fire wire on the pc then turn on camcorder if pc dont recognize camera then it seems to have a problem in the firewire board.
must be replaced.
happy new year

Check if the cable is connected properly. If it is connected properly then check if the cable is working by connecting the device on a diffrent pc ? As soon as you connect you device to the new pc the system will inform that a new hardware is found, that means that the cable and you device are working fine so there is a problem with the computer. Either it is blocked by the firewall or the drivers are corrupted, if it is corrupted then reinstall the sync and things should work smoothly. Make sure you create a backup and restore points before you reinstall the sync

Ok well im 14 and I have a p2 myself. Have you plugged in the cord all the way? Thats what happens to me sometimes. I forget to plug it in all the way and then it wont work. Just try that and let me know. It should work though. But was your p2 recognizing it was connected to your computer?

hi
i got a problem. when i purchace yp-p2 it works normally.but now when i connect it to my pc my usb cable is not working now what i can do now .i cant dounload any songs.can u give me any solution

use control panel, then "add hardware" look for P2 in the list, reinstall it.

Hi,
have you thought about restoring your system, to an earlier point.
before the problems occured, with your software update.
also if this fails, or you are unable to acheive this.
check in the device manager, to see if you have any yellow exclamation marks, next to your device.
you may need to re-install the device/driver for your card-reader.

Mike @ compurepair.