FAX MACHINE NOT PRINTING CONFIRMATION PAGE

CHECK IF THERE IS ANY ALARM, CHECK CARTRIDGE, CHECK PAPER PICK UP ROLLER AND SEPARATION PAD, CLEAN OR REPLACE IT.

Hi Dear

HP LaserJet 3050, 3055, 3390, 3392 AiO Product - How to Print a FAX Confirmation Report Description By default, a Fax Confirmation report (Fax Call Report) will only print when a fax error occurs. However, this option can be changed using the printer control panel.

1. Press the right arrow until Reports appears in the display, press the checkmark.
2. Press the right arrow until Fax Call Report appears in the display, press the checkmark.
3. Press the right arrow until Print Report appears in the display, press the checkmark.
4. Right arrow to the option of choice, press the checkmark to save the change.

FAX call report options

• Send Fax Only - a confirmation sheet will only print when a fax is sent
• Never - no fax confirmation sheets
• Every Error - default setting
• Send Error - a fax confirmation prints when the fax transmission encounters an error
• Every Fax - a fax confirmation sheet will print for incoming

Sending Confirmation
This report shows the fax number, the number of pages, elapsed time of
the operation, the communication mode, and the communication results.
You can set up your machine to print the message confirmation report in
one of the following ways (see page 5.3):
• Automatically after each transmission (ON)
• Automatically only if an error occurs during transmission (ERR)
• No report printed at all (OFF). You can print this report manually at
any time you want.
SENDING CONFIRM - A confirmation report shows whether the
transmission was successful or not, how many pages were sent, etc.
Select ON to print a confirmation report automatically each time you
send a fax.
Select OFF to turn this feature off.
Select ERROR to print only when an error occurs and the transmission
was not successful.

You can use the reports button or menu button to reports, and print out the user settings list. It shows where the settings are, and what they're set on. In fax setup you can select frequency of report printing, but the Brother machines always give a printout if a fax fails.

press FUNCTION, 7, 4, SET, 1, 2, SET, 2, SET, STOP...It will print everytime you fax out a document.

open both one-touch speed dialing panels--press DATA REGISTRATION >set> press search buttons to display REPORT SETTING >set> search to OUTPUT YES (This will print a report with every transmission, next option will give you the option of whether to print the first page of the document (yes) to remind you of what it contains)

press
function
7
monitor key slowly 4 times
3
set


look on the sheet for confirmation + image parameter

set with above procedure but use number 74
set

Scroll through the menus for REPORT PRINT to set confirmation.

Function 74 set 12 set 2 set stop.

Function 7 4 set/ 1 2 set/ 2 set. Stop