At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
what you have to do is ejecting the tape, and as soon as it starts to eject , close the door immediately, then safeguard mode should be gone, and you will be able to eject normally.
Do a search of this problem and you will ind that every JVC owner is having the same problem. I finally got mine "reset" by powering the unit on in payback mode while holding down the "play" button. Then, turn it back off and power it on in the camera mode while holding down the "rec" button. This seems to have reset it and I've not had anymore issues SO FAR! Good luck with it.
Defective mechanism, a stucked mechanism is present. camcorders are smart. it can detect error and shut down itself for safety. earlier models domino the defect if the user is not quick enough to react when something goes wrong with the camera. You need professional service to fix it.
Here's what i found. I was able to clear the message by opening and
closing and ejecting the cassette. I also had to play with the battery
at the same time. Keeping the cassette door open and then pulling out
the battery. After is did this a couple of times i got the message to
clear. I too haven't used my camcorder for some time and now that the
error message has cleared the camcorder tells me that i need to clean
the heads. Hope this helps. Below is the message i found that pointed
me toward ejecting the cassette. An error indication (E03 or E04) appears. - (E03 or
E04 UNIT IN SAFEGUARD MODE REMOVE AND REATTACH BATTERY) This massage a
malfunction of some kind has occurred. In this case the camcorder's
functions become unusable. - Eject the cassette once and re-insert it,
then check if the indication clears. When it does, you can resume using
the camcorder. If the indication remains, consult your nearest JVC
dealer or service center
×