1. Switch off the phone. 2. Hold down the following three buttons: Green (call answer) button, * button, and ‘3′ button 3. While holding these buttons, press the power button and switch on the phone 4. When the message ‘Formatting’ appears on the screen, release all of the buttons
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. The pin, right side in the back of the dvd-tray-lid, which triggers the switch on the motherboard of the dvd player is broken.
2. Not impossible, but unlikely: the proper switch on the motherboard is broken, corroded or just full of dust and does not close the circuit.
Solution to 1.: you need a new lid with intact pin, or glue an improvised pin on place of the broken one.
Solution to 2.: take the whole player apart (not difficult at all), while not disconnecting any cables, so you can now test the trigger switch (momentary switch) manually and see if something happens (on screen appears loading) ATTENTION: BEFORE pressing the SWITCH: cover the laser lens with a piece of paper - do not look into it - it can damage your eyes!!! If nothing happens by manually triggering, try to spray some electronic cleaner (fat and oil free) into that switch, while pressing it continously. If still nothing happens, disconnect battery, DC, de-solder that switch and look at mouser.com or any other electronic parts dealer to get a MOMENTARY switch with exact identical dimensions, etc. Solder it in, everything should be perfect now. Good Luck
yo, try to clean the gold contact of your video card and RAM by an eraser... then put it back to it's position in the motherboard make sure that it is connected firmly...
i dropped my phone down the loo.
it driedin rice.
i chagrd it and it wouldnt turn off.
you'll find the power button is broken.
everything else works fine.
to get it on, i had to remove my pin code. - annoying.
but i got it on.
i had to do this by putting the sim in a diffferent phone. i then found it worked as mine wouldn't turn on. check if it works iwtout your sim in..
×