Need an owners manual for a john deere lawn LT-133

Most likely like this.....
and it will be near the starter solenoid

Hope this page will help
http://www.google.ca/search?ix=sea&sourceid=chrome&ie=UTF-8&q=John+Deere+lt+133+wiring+diagram

John Deere Sabre 1438, 1542, 1642, 1646 Lawn Tractor Service Technical Manual TM-GX10238 * - Download Documents / eBooks

hello arthur, john deere does not post manuals on line,this is all i could find or see your local dealer,hope this helps..

Will it restart right away or does it have to cool down? If it has to cool down, then run it until it quits. Next remove the plug, reattach the plug wire, and ground the plug to the block. Finally try to start it with the key. If you get no spark or very weak spark then the ignition coil needs to be replaced.

Let me know how it goes.

There will be a faulty safety switch somewhere. Most likely the one on the seat. Regards Phil

The only thing you can do is soak them for about a week in Blaster, if that doesn't do it, you will need a torch, a small one, some of that stuff melts quick. I have some parts on my john deere soaking right now. The steering locked up, every time I go by , I squirt another shot on them, the stuff works great, If I can't get it, I'll be getting out the torch. Hope this helps.

did you try the manufacturers web site?

another place to try is www.archive.org

I would go to the dealer and see if they have a diagram of how the wires are to be placed. Or try the internet to locate the diagram there. You may be able to find it at the John Deere web site by looking up the owners manual.

I believe they are 8mmX35mm.

http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt
This link will send you to the illustrated parts list on the john deere site. It shows the belt routing in the part diagram. Hope this solves your headache.