At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My 308 semi-automatic rifle is jamed. i can not open the breach, any ideas this is the second time. i can not get the action out of the stock unless i can pull back the breach.
Re: My 308 semi-automatic rifle is jamed. i can not open...
If it has an empty case in it you could slide your cleaning rod in from the muzzle and tap on it to see if this would help move the bolt back any. DON"T do this if it has a live shell in it ! hope this helps
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are many Factors that go into valuing a Rifle, Condition, Usage, Scope, did I mention Condition? I just assisted my Uncle in selling 8 of his Rifles. He had 3 Bolt Action 30-06 and 1 Semi-Automatic. The Bolt Action are worth a little less than the Semi-Automatic. One Bolt Action was worth $125 due to wear and Camo Paint Scheme. The Best Bolt Action he sold for $475. The Semi-Automatic sold for $350, showed signs of wear and the scope was not the best...
i would get a permit to carry a pistol, somthing like a .357 magnum or .480 ruger. if you are allready a pistol owner you could look into sumthing like a .460 or .500 smith and wesson. these are all good bear stoppers. somthing fully auto is illeagal unless you have purchased federal permits. good luck
you have your self a nice rifle there.i like the .308
OK this is what ya do.open the action and you will see the screws that hold the back part of the receiver in remove them.on the upper side the older model had a screw on the receiver end take that out.up on the for are there is one more on the bottom side remove that.now it will come out in one unit leave the leaver down and grab the front of the stock and pick up on the barrel as your sliding it forward.
hELLO THERE
Please go to www.winchester.com and you will be able to enter your model number and there will be a viewable manual for this and there is also telephone numbers for tech support ok>
×