Hello, where can I find a replacement stainless steel watch band for this watch? TH 200 professional WK1113

Sea Spider 1261 INVICTA Sea Spider Men 50mm Stainless Steel Gold Black dial 3600K Mechanical watch located attached link offers multiple compatible straps

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jamie_580d75bd3bb6d659

Some sprint bars need to be curved, get them in stainless steel.
You need to know the MM size of the spring bar, yu may find that on the strap if its the original strap.
Search for - SWISS REIMAGINED Curved Stainless Steel Spring Bar Pins.
For a box of mixed size straight spring bars look for - Ritche Professional 360pc Watch Band Stainless Steel Link Pins.
Pick up the spring bar tool as well. Amazon sells all of it.

You have to order the links from TAG unless you would happen to see some on EBAY but i would recommend the manufacturer. There are no generic links made for a watch like this! Tag Heuer assistance 1-866-260-0460. I hope this helps you! thank you!

Take your watch into most any jewelry store or even walmart and they will show you a number of stainless steel bands to pick from. J.

go to rolex.com

You need to pound out the adjustment link pins(s) . They are located at the ends of the band. If the watch is not too lold you can pound them out with a cut off piece of a paper clip. If it's too long it will bend when you hammer it so you will go through several of them before you finally get it out. If the band is old and the pin is stubborn you will need a very thin drift pin (tool) to push it through. Pound it through and the pin in the band will go out in front of it.

u need to go to a store that carries tag. go to tags web site and find locate store. if they dont stock the bracelet they can order one in. might be pricy

if you don't have the necessary tools or knowledge then your best bet is to take it in and have a professional remove the link(s) for you. It all depends but sometimes if you take it to Macy's or Neiman's they will do it for free.

Stainless steel bracelet ends (so called wings) must be curved flush to the watch case.
Another way is to use curved spring lugs (pins).