Vivitar dvr 992 hd videos are always blurry even while taking videos its blurry in the view finder screen ive tried everything always tye same

Select your camera model


the 992 hd is in the list

PDF]DVR 480 - Vivitar

www.vivitar.com/files.../DVR_785HD_Camera_Manual.pdf

VivitarDVR 785HD. Action Camcorder .... Your digital action camcorder supports a Micro SDMemory Card (up to 32GB). In order to use your digital ... You can download the pictures and videos without the software by .... HD(1280×720)@30fps.

Amazon.com: Vivitar DVR786HD Full HD Action Camera ...

www.amazon.com/Vivitar-DVR786HD.../B00DM35U...

Amazon.com, Inc.
Rating: 3.8 - ‎19 reviews
Vivitar DVR786HD Action Digital Video Camera, Colors May Vary .... Vivitar's DVR787 HD Action Camera allows you to record amazing footage from your point ...

Amazon.com: Vivitar DVR786HD Action Digital Video ...

www.amazon.com/Vivitar-DVR786HD.../B00DM35P...

Amazon.com, Inc.
Rating: 3.9 - ‎44 reviews

Battery problem.

Try Retrevo Manuals.com Heaps of manuals

Even onderwater cameras can't survive water, when it is in the camera. If you really have water in the view finder, there must have been a leakage. If you can't open the camera, put a for a while in a bag filled with rice. Only wham it is dry you could try to use it again. Always test if the camera is water proof, before you take it down.

You have a defective lcd screen that needs to be replaced, even if LED back light works.

http://www.vivitar.com/products/2/digital-video-recorders/417/dvr-508

Hello Friend,
if the videos that you are taking are blurry, this can be related to a wrong configuration or screen issue or lens issue. here is how to diagnose the issue:
1. first you can start by doind a reset factory of your camcorder, this can be done from the camera menu.
2. if after reset the problem persist, you will need to check if it's related to the screen or no. you can check that by transferring the videos to your computer and play them from there. if they are blurry even on your computer. that means it's not related to the screen.
3. Try to take videos in different places with different conditions (dark place, in public place during the day with natural light, indoor with light ...) if they are all blurry in all places, that means it's related to the lens.
4. In this case, you can try to clean the lens with a Microfiber tissue and see if this will help. otherwise the lens is broken and needs a repair and in this case i hope that the camera is still under warranty.
Good Luck!

Screen may have damaged ribbon connector in hinge/pivot assembly. Have it serviced

Problem is not with Vista or the camera drivers. More likely it’s that the camera is set in “macro mode” which is used for taking photos of things real close. On the right side of the camera there is a slide switch, you want to be sure that it is in the up position (Normal).

If the switch is in the correct position, look if the lens is clean. Even if the LCD shows a good image a smudge on the lens will show up on the photo.