E100 not getting detected

Try reformatting it in FAT not FAT32. You may then need to install the firmware for it. I have attached a link to the iRiver Site below. Thanks for using FixYa

http://local.iriver.com/usa/lounge/loungeView.asp?selectPart=&findWord=&sno=990&page=2&cateCode=

Hi there,
did you have unexpected errors occur during video playback?
please make sure that:

• Supported file formats: AVI, WMV
• Be sure to use iriver plus 3 when transferring video files. (Otherwise, unexpected errors occur during video playback.) Download iRiver plus 3

You can ask for more in assist, I would be glad to help.
(More info would be more helpful resolving the issue)

Goodluck :)

Hi, i have the same problem with E30, did you solve it? thx [email protected]

Try Wondershare DVD Ripper Platinum, the problem due to the codec of your ripping program.

i would ring up iriver and say my speakers dont work and u might be able to send it back to get it fixed

Try to official site and see if they can help-

http://www.iriverinc.com/support/

Hi,
Here's the iRiver Plus 3 software:
http://www.iriver.com.au/iriver/uploads/software/iplus3_setup_full.zip

It's compatible with XP and below. I haven't come across a Vista driver for it yet, but you might be able to right click on it and hit Properties and select XP compatibility in Vista, I don't know if it'll work though.

Hope this helps

Please Rate

your speaker could have some kind of liquid or something that has stopped them i would send i back to the factory

Sometimes AntiVirus software, even from names like Norton and McAfee, falsely detect good software as a dangerous download. If the player is NOT brand new, never-been-used, and fresh out of the box, then I would format the mp3 player first to make sure that there really isn't a virus on it. If it is brand-new, then you can either turn off the McAfee or change the settings (temporarily) which lead to automatically remove threats - make sure to reactivate this setting once the software is installed. Alternatively (perhaps even a better solution) - you can download a clean version of the software from iRiver's website - their support is fairly good - just click the Plus 3 link on their new, simplified website.

-Tha Mp3 Doctor

Software / Media Transfer The E100 comes packaged with a disc containing iriver plus 3 media player, firmware updater, video converter, and Windows Media Player 11. If you have owned an iriver player, you are familiar with this software with the included iriver media player. This is a standard media player much like any other but has a few features catering to the iriver family of players, such as a firmware updater, ebook txt manager, and video converter. This media player is a bit different from Windows Media Player but still is straightforward and easy to use. If you don’t care for iriver’s media player you can always use any other MTP based media player to manage playlists and load your E100 since also included on the disc is a video converter and firmware updating utility.
If you don’t like to use media players to transfer the E100 will allow you to select either MTP or MSC transfer mode. This means it is drag and drop and also compatible with any OS. Drag and drop will work fine in MTP mode as well, but only if you are using Windows XP SP2 or Vista.

and the difference between e10 / e100 your guess is just as good as mine