My wifi does not work. I go on the WLAN settings and click on Wi-Fi. It then brings up a blank screen. Previously their would be a list of all the available networks. Now it just keeps showing up as a blank screen and when i turn the wifi on, it does not detect any available networks. Can you please help me. I also tried to reset the phone to is manufacturer defaults but in the expert folder their is no clear storage option.

1. Connect to your router Globe B315s-936/938 (via Wi-Fi using the default credentials printed at the back of modem or connect directly thru LAN cable).
2. Open your web browser, and enter 192.168.254.254 in the URL address bar to open the Globe Broadband web interface/dashboard.
3. Click Login on the upper right of website interface. Type the Globe default admin username and password. Username: user and Password: @l03e1t3
4. Open WiFi settings. For 938 modem, go to Wi-Fi Settings For 936 modem, go to Settings > WLAN > WLAN Basic Settings Set the settings to: SSID: Your Desired WiFi Name Security mode: WPA/WPA2-PSK WLAN Key/WPA Pre-shared key : "Your Desired WiFi Password" SSID broadcast: optional settings if you want to set your wifi as public or hidden.
5. Click Apply and you are done.

• First, tap on your Settings app (or icon if you have a shortcut on one of your home screens). It's the one that looks like a cog or gear. This will bring up the Settings menu.
• On your Settings menu, tap on Wireless and network.
• You should now see a list of wireless-related menus. Tap on the Flight mode - also generally known as Airplane mode - to disable all wireless connections. You'll know it's working because you get an airplane icon on your notifications bar.
• Great, now you won't be getting any incoming calls. But wait! Now your Wi-Fi connection isn't working, either. Nice going, Jason, you regular Einstein. Hold on your horses, though, because we're not done yet. On that same wireless submenu, tap on Wi-Fi settings.
• Click the option to Turn on Wi-Fi.
• Look at your notification bar on your home screen again. You'll still have the airplane icon on, indicating that you won't get any calls. But you will also start seeing a Wi-Fi signal icon. Voila! Now you can connect to a Wi-Fi enabled router or hot spot without worrying about getting roaming charges.

google translated

not authenticate the key to my office to access internet by wi fi

if you cant connect to wifi on your laptop computer
Turn on your computer and locate the Wi-Fi icon. This could be located on the upper row on a laptop it will have the radiation look (((•))) Make sure its pressed on. Usually a wifi enabled phone, computer, or whatever device, will recognize if there is wifi access near you. If not you may need to turn on the wifi on those devices. Usually those setting can be found in menus like Network Settings. Once it recognizes the network you will need the password if it is required. Just enter that in and you are set. Where you enter the password is usually in the same menu in which you turned on your wifi enabled device. if still no connection Power on the laptop computer and wait for the operating system to boot. Right-click the wireless Internet icon in the lower right corner of the desktop. This brings up a new pull-down menu. Select "View Available Wireless Networks." This brings up a selection of different possible Internet connections that are in range of the computer. Select the wireless Internet connection you want to use. If a password is required, you need to type it in now. Wait for the laptop to connect to the Internet. In a moment the computer is going to state it has successfully connected to the Internet. Click Start, Run type in cmd and click Ok to bring up a command prompt. Type ipconfig /all and press enter and see if it gives you an IP address similar to 192.168.1.100. Check your wireless connection properties under My Network Places. Right click the wireless connection icon and choose properties. From there make sure Internet Protocol {TCP/IP} is listed, highlight it and click properties. Make sure Obtain an IP address automatically is checked and Obtain DNS server address automatically is checked. Make sure you Ethernet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys scroll to intergrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its enabled if still no joy Let's first try to start the wireless service i.e. WLAN AutoConfig service manually. To do this, login to the computer as an administrator.

1. Click Start, type services.msc and hit enter.

2. Locate WLAN AutoConfig service, double click on it to open its properties window.

3. Under General tab, change the Startup type to Automatic and click Start button.

4. Click Apply and then ok. For more information about the wireless settings, check this link: http://technet.microsoft.com/en-us/library/bb878035.aspx

Hi cusack_janet,

You can follow this steps. Make sure that before you open you Wi-Fi settings, you are in the Wi-Fi Zone.

1. Click on the wi-fi icon in the menu [mostly in middle screen if you havent customised the menu items].
2. On the next screen it wud say 'Tap here to turn Wi-Fi on' and there wud be round button saying Wi-Fi.
3. Tap on that to switch on wifi.
4. Now on the bottom menu bar Click on Search
5. It will show u a list of wifi network available.
6. Click on the one u want to connect to [A menu pops up]
7. Click on Add in the menu
8. In the form enter the network key [password u need to connect to ur wifi]
9. Depending on ur other settings of you Wi-fi router, you may need to enter some details in the form
10. Once done, click Save
11. Now u r ready to connect.
12. Click on the network u want to connect to and click on connect.


Hope this helps.

Thank you for using Fixya

Yup its have a wifi signal. But you need a wifi router .like mall they have a free wifi or a computer shop. If you want to open your wifi just 12 click menu-setting-connectivity-WLAN-on your wifi then search.then click the available wifi then if say connected.. You can now internet..

To connect to a WLAN via Wi-Fi™:

1. From the Home screen, find and tap Settings.
2. Tap Wireless controls > Wi-Fi settings.
3. Mark the Wi-Fi checkbox. Available Wi-Fi™ networks are displayed in a list under Wi-Fi networks. The available networks may be open or secured. This is indicated by the icon next to the network name.
4. Tap a Wi-Fi™ network to connect to it. If you are trying to connect to a secured Wi-Fi™ network, you are asked to enter the security key for that Wi-Fi™ network before you can connect to it. The Wi-Fi™ connection is displayed in the status bar once you are connected.

Useful tip:

• The next time you connect to a Wi-Fi™ network, the phone will remember the security key.
• To enable Wi-Fi™ network notification of open networks, mark the Network notification checkbox.
• To connect to another Wi-Fi™ network, just tap another Wi-Fi™ network in the Wi-Fi networks list.
• To scan for Wi-Fi™ networks manually, press the Menu key and tap Scan. The phone scans for Wi-Fi™ networks and displays them in the Wi-Fi networks section.

You can also try updating your softwares by going to the sites below;

Update Service,
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax8?cc=gb&lc=en

PC Companion,
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pccompanion/xperiax8?cc=gb&lc=en

Start the program and just follow the on-screen instructions.

I hope this will help.

access point is a code of wi fi without it u cant to wi fi. some its shows connect but its connected its not only in mobile,but shows in pc also. its just because of internal settings. if u want to check ur mobile then u should go a place where wi fi is working like college etc. and u should know the code of wi fi. then set ur settings with code. good luck.

this may be alot of info to try and work through but if you actually did the step by step its pretty easy.. so lets get on with it...

your psps wifi is already active. you just have to find the access point to get online. 1st question. do you have wireless internet connection at home or is it wired. meaning this..... in your home internet setup you have a wire that comes into your home>that is connected to a modem>that is connected to a router that is wireless or wired router... in a wireless setup the computer(s) communicate with the router without any cables also know as wi-fi.

if your computer(s) uses wires/cables to connect to your router or a modem then you don't have wi-fi access zone meaning you won't be able to log online with your psp.

now with that out of the way if your home is set up for wi-fi you can set up your psp easily. but you would have to know few things about your internet setup

*NOTE* BEFORE WE START LETS MAKE SURE YOUR WLAN BUTTON ON YOUR PSP IS ON. LOOK ON THE TOP OF YOU PSP NEXT TO WHERE YOU PLUG IN THE CHARGER CABLE... THERE IS A WLAN SWITCH... SLIDE IT TO THE DIRECTION OF ARROW

1)on your psp go to settings
2)go to network settings
you'll get 2 options. adhoc mode and infrastructure mode. adhoc is for playing games with your friends by directly communicating between psp. infrastructure mode is where you go online using an access point i.e. wireless router or business that offer free wi-fi
3)click on infrastructure
4)click on new connection
which will bring you to WLAN SETTINGS screen
5)click on scan
it will show you 3 or 4 access point. always use the one with the highest signal.

this is where you have to know something about the setup of your own internet.

SSID is service set i.d. -- it is just a name you give your home network when you set it up. i.e. jones, or myhome, or whatever u called it..

6)on the next screen is where u put in the SSID. so ask whoever set up your home network to see what they set it up as.

on the next screen is the WLAN security setting which is another way of saying password. again ask the person who set up your home network what this is. some people have not set up a password so this step could be easy. if this is the case with yours just click on "none" but if you have a password set up on your home network click on one of the other three (wep, wpa-psk (tkip) or wpa-psk (aes)). in my home i have it set up as wpa-psk (tkip) so i click that one. when i do it'll take me to WPA KEY...again another word for password

7)so put in WPA key (password) of your network
once that is done go to the next screen which will be address setting

8)click on easy to make it easy

9)enter the connection name... you can call it whatever u want.... if you go out alot to the different fastfoods and coffee houses you can set it each one of them with their name. for example if you set up your psp to be able to access wi-fi at mcdonalds you can name it mcd. and another for starbucks if you set up your psp to access their wi-fi, and another for library...so on and etc....
10) on the next screen is where you double check all the info you put in
11) and finally to save your settings.

after that click on "test connection" and if you set it all up correctly you get a page that shows you your connection info. if not it'll be on connecting to access point, obtaining i.p. address. if it stays on this screen for longer than few minutes or you get time out message something is not set up right. and you should retry the steps.

if you don't know your network settings one easier way of trying out your wi-fi is go to one of the local fastfood or coffee houses or library or book store that offer free wi-fi to test it out. just follow the steps

1)on your psp go to settings
2)go to network settings
you'll get 2 options. adhoc mode and infrastructure mode. adhoc is for playing games with your friends by directly communicating between psp. infrastructure mode is where you go online using an access point i.e. wireless router or business that offer free wi-fi
3)click on infrastructure
4)click on new connection
which will bring you to WLAN SETTINGS screen
5)click on scan
it will show you 3 or 4 access point. always use the one with the highest signal.
6)the highest signal will be the access point for the store u are in. click on it and it should bring you to the stores policy page and after clicking agree you should be good to go.

hope this helps... could get/look complicated but it really isn't

Activate and connect to a WLAN
1.In range of WLAN network, access an application or menu that needs a wireless connection.
2.On the Home screen, press <Start> → <More> → Settings → Connections → More... → Wi-Fi.
3.Press <Menu> → Turn On Wi-Fi.
The device will display available WLAN connections.
4.Select a network profile from the list.
The device will attempt to connect to the WLAN.
5.Select a network type and press <Next>.
6.Enter a pre-shared key for WLAN and press <Next> or <Finish>.
7.Set the IEEE 802.1x access option and the extensible authentication protocol (EAP) type and press <Finish> (if necessary).


Create a new WLAN
1.On the Home screen, press <Start> → <More> → Settings → Connections → More... → Wi-Fi.
2.Select New...
3.Enter a network name, configure connection settings, and press <Next>.
4.Enter network authentication settings and press <Next>.
5.Set the IEEE 802.1x access option and the extensible authentication protocol (EAP) type (if necessary).
6.When you are finished, press <Finish>.