SOURCE: homedics SS- 5000
Hey, OK so you know how when you plug the clock in it takes like 5 minutes to upload? Well wait till you have the time set the atomic thing stops flashing. Now when you get there press the button on the inside of the outside temperature thing. Not the c/f one. The red dot should flash on the front of the thing your holding. It should work after that. If not then make sure you don't have any computers or cell phones by it that messes with it. Hope this helps.
SOURCE: Homedics SS-4000 Clock Projection Display Problem
per Ken in response to SS-4500: Worked for me right away! keith
Ten8
Rank: Apprentice
Rating: 92%, 6 votes
To fix the projection display that is stuck with four 8's, hold down the hour and miute button at the same time. Keep the buttons pressed down while unplugging the power source then pluging it back it. I did this and the screen works like it did when I first got it.
Ken
SOURCE: homedics soundspa clock radio ss-4500
I had the same problem - the directions can now be found here: http://media.homedics.com/IBs/SS-4500_IB.pdf
75 views
Usually answered in minutes!
×