Question about Samsung Cell Phones

Open Question

Microwave oven turntable start turning when door opens

Samsung model me9114w

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
MicrowaveSvc
  • 9173 Answers

SOURCE: Panasonic Microwave Turn table rotates when door is open

Found this Panasonic post in the Samsung section!

If it moves just a tiny bit when the door opens and then stops, that's normal.

If it keeps running when the door is open, that's usually due to a bad door switch or broken / loose door switch mount.

If you or a friend decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and
disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk

Any Panasonic parts not available locally can be had here: http://www.pasc.panasonic.com/epartr

We appreciate your thoughtful rating of our answer.

Posted on Nov 17, 2007

Ad
MicrowaveSvc
  • 9173 Answers

SOURCE: when I open my microwave door, it starts running

.
In most cases, it's not actually cooking, but instead the fan, turtable and light may be on. Yet it does need attention.

What this usually means is that you have a shorted door switch or a bad door switch mount.

It's easy to tell if it's actually cooking, just place a cup of water inside and see if it heats.

If so, that could mean a stuck relay on the control board. If so, we repair these for customers nationwide with our guaranteed $39.95 service. Far less than a new board.

If you or a friend decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and
disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk

Please write back with more details if you need further help.

We're happy to help and we appreciate your thoughtful rating of our answer.

Posted on Nov 26, 2007

MicrowaveSvc
  • 9173 Answers

SOURCE: The turntable keeps rotating when the dooe is open - Panasonic T994SFR

This is usually caused by either a bad door switch, a loose door switch mount, or occasionally a problem on the control panel.

Even though a door switch clicks, it may still be bad inside. Its continuity must be checked.

Door switch or mount trouble can be caused by slamming the door or by opening the door while it's cooking without hitting the Stop pad first.

There are plastic mounts inside the microwave which hold the door switches and onto which the door latches lock when you close the door.

The screws on these mounts may be loose. If they get too loose, the switches will not be activated properly.

Sometimes it's a broken tab on the switch holder, allowing the switch to rotate just out of position. Other times, it's a broken tab on the switch holder, allowing the switch to rotate just out of position. This tab can be hard to see, since it is under the bottom edge of the switch.

One test that sometimes helps is to gently lift up on the door or handle as you try to start it. If it works or tries to work, then it's a door switch mount or door alignment issue.

We have critical safety & disassembly info (including a how-to video) at our site, linked here.

If you think the problem is on the control panel, we repair these nationwide by mail for $39.95 postpaid in most cases.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.

Posted on Jul 19, 2008

MicrowaveSvc
  • 9173 Answers

SOURCE: Microwave will not turn off

This is usually caused by either a bad door switch, a loose door switch mount, or occasionally a problem on the control panel.

Even though a door switch clicks, it may still be bad inside. Its continuity must be checked.

Door switch or mount trouble can be caused by slamming the door or by opening the door while it's cooking without hitting the Stop pad first.

There are plastic mounts inside the microwave which hold the door switches and onto which the door latches lock when you close the door.

The screws on these mounts may be loose. If they get too loose, the switches will not be activated properly.

Sometimes it's a broken tab on the switch holder, allowing the switch to rotate just out of position. Other times, it's a broken tab on the switch holder, allowing the switch to rotate just out of position. This tab can be hard to see, since it is under the bottom edge of the switch.

One test that sometimes helps is to gently lift up (and/or push down) on the door or handle as you try to start it. If it works or tries to work, then it's a door switch mount or door alignment issue.

If you or someone you know decide to look into it, we have critical information on safety, disassembly and door switches at our site, and our link is at our listing here on FixYa:.

You can probably find exploded views and order parts by entering your model number here at the Sears parts site.

There may also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.

If you think the problem is on the control panel, we repair these nationwide by mail for $39.95 postpaid in most cases.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.

Posted on Jul 28, 2008

MicrowaveSvc
  • 9173 Answers

SOURCE: Sharp Carousel R-1481 Turntable

It may very well have have damaged the turntable motor.

The turntable system consists of the motor, the coupler, the turntable support with rollers, and the tray.

You can see and hear a video of how a turntable motor should sound when you rotate it by hand.

If yours is not set to be off via the control panel, and it won't rotate or it sounds like it's grinding, etc., you may have a bad motor or plastic coupler.

To replace either, you need to unplug power, then remove the bottom cover of the oven.

On many Sharp models, you have to cut the motor cover off with snips, then use a screw when reassembling it.


We have the service / repair manual for this model and have uploaded it to our site here to help you.

It will give you safety info, step by step help in disassembly, troubleshooting tips, and part numbers.

You will need the
free Acrobat Reader to view or print it in case you don't have it already.

The best place to order parts for this brand is Encompass (formerly Tritronics). Or you can call them toll-free at 866-779-5835.

Be sure if you cook an egg that you puncture the shell first so it can breathe.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Microwave won't stop running


there's a ghost in your microwave, call ghost buster. Seriously, the problem is the control panel. (((((the microwave oven can store thousands of volts of electricity in its high voltage capacitor, even after the microwave oven has been unplugged. That's more than 30 wall outlets combined.
Replacing electronic parts in a microwave oven can be extremely dangerous.))))))) tank you
Samsung Model SMH1816S XAC Parts

Mar 30, 2014 | Samsung Microwave Ovens

1 Answer

Shm1816s Samsung microwave oven wont shut off All lights off turn table not turning but you can hear the humming. the turn table plate gets very hot.


Hi,
if the turntable is getting hot it means that the microwave is working but as the turntable is not turning , it means the adjustment of the door lock of your microwave may have become improper due to use.may be it got damaged.
call the technician of samsung microwave ,he will open the cabinet of microwave and make the adjustment of door lock proper.
Thanks
Nitin

Oct 19, 2013 | Microwave Ovens

1 Answer

Samsung microwave disorienteted


It may juts be a bad door switch or mount. See our help fil on door switches here:
http://031d26d.namesecurehost.com/mwd/doorsw.txt
If you still need help, please post a new help request with the full model number from the tag in the cooking cavity or elsewhere on the microwave, such as the door frame, controller frame, etc.

May 02, 2013 | Microwave Ovens

1 Answer

I have a model number EM925RSL-B and the timer counts down but it does not heat up or turntable does not move?


I just bought an RV with the exact same microwave and the exact same problem. The problem with mine is the switch that detects that the door is closed is not getting activated. The reason for this is is the finger at the top of the door is damaged as well as the plastic piece that the finger grabs onto when the door is closed. This causes the finger not to come into contact with the switch. To test this you can turn your microwave on and start it. open the door and using a small screwdriver, depress the micro switch you can see upper right side of the door opening. then press start again. your turntable will start turning and the microwave will make a louder noise as a fan will turn on. CAUTION! Release the button as soon as you see the turntable rotation as you will be receiving microwave energy due to the door being opened.

Jul 02, 2011 | Microwave Ovens

1 Answer

MODEL MW543OW, TURN OVEN ON TO REHEAT, OPEN DOOR TO STIR, CLOSE DOOR AND HIT START, NO FAN OR TURNTABLE, LIGHT AND CLOCK STILL WORKS


That would be model MW5430W. but no matter.

I would suspect a bad door switch or door switch mount.

See the files:
http://031d26d.namesecurehost.com/mwd/safety.txt
http://031d26d.namesecurehost.com/mwd/disassembly.txt
http://031d26d.namesecurehost.com/mwd/doorsw.txt


We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

May 26, 2011 | Samsung Microwave Ovens

2 Answers

Samsung microwave oven turntable doesn't turn now. Is it ok to still use to heat/cook food ? What is the problem with it ?


Yes it just will not cook or defrost very evenly. It is not dangerous however.

Probably the motor or gears that make the turntable go are worn or burnt out.

May 01, 2009 | Samsung MU3250W Microwave Oven

1 Answer

I have a Whirlpool AMW545 built in microwave oven. The turntable continuosly runs with the door shut when the microwave is not in use. The turntable will stop rotating if the door is opened.


the controller for the turntable is shorted out or welded its contact if its a relay. the door has safety switches that turns off the electrical connection to the turntable and magnetron once you open the door. you can trace the switch that runs the turntable. start from the power supply, goes to the door switch then to the controller before it goes to the turntable motor. i'm sure it has an electrical diagram at the inner wall of the cover.
i hope i was able to help.

Jun 27, 2008 | Whirlpool Microwave Ovens

1 Answer

Microwave Oven Problem


Quite often this is due to a bad door switch. Opening the door while cooking (without first hitting the STOP pad) is the primary cause of door switch failure. It's probably not actually heating with the door open, but better safe than sorry! If you or a friend decide to work on it, we have *critical* safety, disassembly, and troubleshooting info (as well as a text file which helps in diagnosing and repairing door switch problems) at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk You can find helpful exploded view diagrams and order parts by entering your full model number (without the suffix) here: http://tinyurl.com/gv383

Apr 10, 2007 | GE JEM25 Microwave Oven

1 Answer

Smasung MW7490w door/turntable problem


It's probably a defective door switch, probably the upper one, or the mount which holds the switch is broken. Opening the door while cooking (without first hitting the STOP button) is the primary cause of door switch failure. There are plastic mounts inside the microwave which hold the door switches and onto which the door hooks latch when you close the door. The screws on these mounts may be loose. If they get too loose, the switches will not be activated properly. Usually it's not a loose screw, but instead a broken tab on the switch holder, allowing the switch to rotate just out of position.

Sep 23, 2006 | Samsung SMH7159 Microwave Oven

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cell Phones Experts

Felizardo Erilla
Felizardo Erilla

Level 2 Expert

241 Answers

Bill Long

Level 3 Expert

606 Answers

Donni Steen

Level 3 Expert

687 Answers

Are you a Samsung Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...