Navman Repair Have a Navman MIO 168 Palm GPS unit. Need to find a service center to repair the broken power/data connector.

Please try and reset the unit , check for fault in the settings . You can also remove the power and try a long reset and if after the boot there is no detection it is best to seek assistance specially if the unit is new as you can avail of free replacement warranty.

You will need to look for service at your countries MIO site. You can find them at the link below:

http://service.mio.com/

Hi,
Not much to do here I'm afraid. a repair is needed. If your device is not under warranty anymore, you can get in touch with Navman / Mio, they have a trade in offer towards a new Mio device

I found it at ipaqrepair.co.uk. I expect to have it in hand early nextweek.

Buy the connector on the internet(its out there) and find some one with electronic repair savey and have them repair the unit for you. It's a better fix and won't cost you so much. I sent my unit to Mio and instead of just replacing the connector they replaced the whole main board + display. Sounds good but I have had problems with my SmartSt GPS program ever since. (Version problem) Can't get them to fix it.

If you cant put it in service , you can try to resolder only needed pins for charging. here is a link with pinout : http://pinouts.ru/PortableDevices/mitac_cable_pinout.shtml

Here's a solution for the broken socket on Mio 168 and Medion Micromaxx mdppc150 clones. Cheers

Any electronics repair place or perhaps a camera repair shop should be able to fix it for your. Search google or your local phone book for electronics repair or camera repair. This is a very easy repair IF you are electronics savvy, but not a good first/learning project. This will require either soldering a loose connector back to the board or they may need to find and purchase a new connector to replace the old one if it is broken.

Navman Australia online store http://www.navman-store.com/aus/range.php?category=Accessories&range=PiN+Series

www.dg-kehao.com
please check this website you will get the replacement you are looking for.
if you want to ask something directly, please contact me: [email protected]