Error light Hi - The exclamation point in the triangle has a blinking orange light next to it - what does this mean???

Canon printer light blinking error is a common error. Each printer features a flashing light to indicate its functionality. With Canon printers, you have flashing green and orange lights to inform you of any existing problems. It is suggested to carefully observe the number of flashes or the pattern of blinking lights as this will help you to understand the problem. And depending on the pattern, you can follow our canon printer troubleshooting guide mentioned below to solve that issue.

What does triangle with lightning bolt mean on Canon printer?

The orange triangle with the lightning bolt comes on when the printer is plugged in. The white light above the power button is on, but the printer is otherwise dead.

What does the orange triangle mean on my Canon printer?

When a printer error occurs, the Alarm lamp flashes orange as shown below. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. Power Lamp Flashes Green.

What does the triangle symbol mean on my canon printer?

Seeing a yellow triangle with an exclamation mark usually indicates that a hardware device needs to be updated. If you are seeing the mark in Device Manager, we recommend checking the device status of the printer driver.

What does the flashing yellow light mean on Canon printer?

When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed on the computer screen.

Paper could be lodged in printer somewhere. Check front and rear area where paper runs through. Then unplug and try to reset

where the orange warning is ?

Look in your owners manual

Can also find those symbols on the internet

Its an information / error led . It says server hardware has encountered an error. Find device that has error and replace it if required .

You can see a similar orange color on device that has error .

Check these parts for orange color .
1: SMPS
2: Memory

Thanks

Hi, The exclamation point in triangle blinking is the "Emergency Blinker" This blinker turns on all all of the turn signal lamps at all four corners of the car. Left and Right, Front and Back. The triangle represents the European symbol for roadside emergencies. In fact on European Mercedes and other cars there is a triangle shaped reflector you can put behind the car so that other drivers know you have an emergency. THAT TRIANGLE ON YOUR DASHBOARD IS A BUTTON. PUSH IT ONCE. THE BLINKING SHOULD STOP. If you have a roadside emergency, and are broken down by the side of the rode. Push the Red Triangle and your lights will blink on and off ouTside to say, in effect "help".
Hope this helps.
Best,
Mark

This triangle light blinking indicates that a door is open. Open the front access door completely. Close the front access door completely. Open the rear door and close it.

If this didn't fix it refer to this guide for all errors you get with this printer from HP website.

bulb failure warning,check your brake lights.

I have a yellow triangle with a ? on my dash what does this mean

It is out of paper.