Broksonic drvcr900 Can not Finalize DVD

A third party direct replacement remote is available here: https://www.remotes.net/products/replacement-remote-for-broksonic-drvcr900 Walmart has a similar remote: https://www.walmart.com/ip/Replacement-Remote-for-BROKSONIC-RT076R0JJ010-076R0JJ010-DRVCR900A-DRVCR900/573348662 .

I hope this helps.

Cindy Wells

Try manuals online,com, You might be able to find the manual on there end down load it,

Hi,
Finishing / finalizing DVD should be on the DVD recorder that you recorded previously..
Put it back in..
go to MENU
and look for FINALIZE title under RECORDING menu..
and select it OK ,let it finalize..then you can play it in any DVD player..
one note ..do you know that this recorder can only record to DVD-R
DVD-RW discs...as Write support..not the ones +R/RW

Hope this helps!..otherwise let me know..
Take care and please Remember to rate/vote and give us 4 Thumbs Up
to continue for Helping out the Community :)

put the tape to be copied in and put the dvd in
make sure the player is set to VCR not DVD
press the button on the remote that says dubbing and it will automatically start recordong the tape to the DVD
when done hhit stop and it will stop both

hope this helps :)

I tried to post but it will not. I can email if I have an address to send

Hello. Kindly try pressing the SETUP key on your remote control and then go to DISC SETUP and then locate Finalize Disc. Regards, Joe

maybe you don´t get the disc to finalized and that´s why only be played on the dvd who record him

you need to finalize the disc

SEE U CAN GET ONE THREW 1(800)736-6837 YOU WILL NEED THE MOBEL NUMBER

I think your wasting your money. I did too 3-times couldn't get anything to work. A solution that works is to get a new one for the machine.

Try going to http://remotecontrolwarehouse.com/BROKSONIC/076R0JJ010.html

I got mine (new) for $30