MY MORETTI HEATER WHEN TURNED ON DISPLAYES AN ERRIOR CODE E1 WHAT DOES THAT MEAN

Lots of heating issues eh?

https://www.google.com/search?q=american+comfort+infrared+e1+error+code&

..

Typically, the E1 Error Code means that your boiler is running low on pressure, which is the cause of the boiler locking out and not working. When you see this code being displayed, all you have to do to fix it and get things back to normal is to repressurise your boiler.Aug 11, 2022

What does E1 mean on a boiler? E1 error code solutions

https://heatable.co.uk > boiler-advice > e1-boiler-fault-code
About featured snip

..

E1 is an error code that may be displayed on a Lifesmart infrared heater. It typically indicates a problem with the heater's thermostat or temperature sensor.
If you see the E1 error code on your Lifesmart infrared heater, it is recommended that you try the following troubleshooting steps:

1. Check the heater's power cord and ensure that it is securely plugged into a working outlet.
2. Check the heater's thermostat and ensure that it is set to the correct temperature.
3. Check the heater's air filter and ensure that it is clean and free of debris.
4. Check the heater's temperature sensor and ensure that it is properly connected to the heater.
5. If the above steps do not resolve the issue, it is recommended that you consult the heater's owner's manual or contact Lifesmart customer support for further assistance.

It is important to note that if the E1 error code persists, it is possible that the heater may be malfunctioning and may need to be repaired or replaced.

The E1 error code on a Comfort Zone CZ220 heater indicates a problem with the high-temperature limit switch. This switch is a safety feature that shuts off the heater if it overheats.
To clear the error code, you can try resetting the heater by unplugging it from the power outlet and waiting for at least 30 seconds before plugging it back in. If the error code persists, it may indicate a more serious issue with the heater that requires professional repair.

generic code for thermistor (temp sensor).

E1 Error Code This is an error on the thermistor. For instance, if your EcoSmart tankless water heater unit is displaying this E1 error code, it shows that you are being notified of the EcoSmart inlet thermistor that is not reading the proper temperature.Sept 22, 2021

Troubleshooting EcoSmart Tankless Water Heater Error Codes

AK Techno service is the best service center for repairing and service for all types and brands of washing machines.
For more visit our website. http://aktechnoservice.com/samsung-washing-machine-service-center-in-hyderabad

Remove up and down liver moter cabel in mother board. And restart machine. Now ok e1 error.

check room&coil sensors

www.moretti.com.ar/downloads.php?id=132

homeappliance.manualsonline.com > Household Appliance

E1 is only the first part of the error code. There should be one or 2 more digits being displayed, alternating with the "E1" display. Unless you provide the other 2 digits of the error code, I can't help you.

You can get the user manual for your boiler/water heater with the error codes from here:

http://www.blueridgecompany.com/documents/LaarsHT330.pdf

Please, get back to me if you need any more help

Alex