Need to replace cooler pad. where do i find replacement?

This Aspen pad is avalable from a couple of sites, including Amazon which ships from hardwarehabitat.com, also from onlinehardwarestore. I used the following argument to search: "CONVAIR" ASPEN PAD COOLER REPLACEMENT PAD It is getting more difficult to find, mine is 7 years old. best of luck!

It seems like your pad needs replacing if you have a build up of algae
There is no way to wash out the pad properly without destroying it
You have to be careful with cleaners as you will be breathing the residue later

From the ad below, it replaces old water with fresh. ------------------------------------------------------------------------- » HVACR» Air Conditioners» Evaporative Cooler Accessories Universal Cooler Cleaning SystemBrand: MastercoolModel: CM120ASKU: 47495

$74.13

3 Business Day Shipping $7.91
No Longer Available Mastercool CM120A Universal Cooler Cleaning SystemTotal Ratings: 0
Average Rating: 0
Review this item Product Information Item Cleaning System Function Timer-actuated, Automatically Removes Mineral-laden, Dirty Water every Six Hours and Replaces with Fresh Water, Reduces Scale Deposits and Leaves Pads Cleaner, Saves Up to 70 Percentage of the Water Weight 3.10

• Replacement Motors and Accessories

• Universal Cooler Accessories

• Cleaning System
• Save up to 70% of the water used in bleed-off cleaning systems.
• Timer-actuated drain system automatically removes mineral-laden, dirty water every six hours and replaces with fresh water.
• Reduces scale deposits and leaves pads cleaner.
• Uses: For residential size coolers only.

• Note: Limited availability.

Universal Cooler Cleaning System, Clean Machine Pump Cooler Flushing Device for Residential Size Coolers Only

I have Danby keg cooler touch pads in stock, the touch pads are the most common failing part on the coolers, I also have access to many more parts as well as technical assistance, please ask for Erin (509) 928-7176

www.comfortgurus.com I think you can find what your looking for here.

These pads are available in different sizes and styles at home improvement stores like LOWES or HOME DEPOT (in season)

The pads you need are at least 8 inches thick. If you have the contractor model, then the pads will be 12 inches thick.
Find a distributor in your town that sells cooler parts, if they dont have them, some of the big home improvement stores carry the pads for your cooler.
Make sure you are using a bleedoff or a dump pump to eliminate the hard water out of the cooler. If you keep those pads clean, they wiil last for many years.

The cellulose pads in a mastercool are glued together and usually the adhesive is what you smell. It may take a while for it to go away. Strange as it may seem, as the pads get more mineralization and you use it more the smell will go away. Do not use a cooler for your whole house without plenty of exhaust through a window or an updux. Coolers work best when there is plenty of freely moving air.

we drained the water and fill it up again and started to worf fine. we think that maybe we filled it up too much. thank you

How do I replace a rigid pad on my Mastercool swamp cooler?