I NEED A TRANSISTOR NUMBER FOR ACER 1716S WITH 6 PINOUT

There is an equivalent one detailed here:

http://www.weisd.com/test/GenericParts_WEISD_view.php?editid1=ST25C

[1 2 3 4 5 6 7]
[8 9 10 11 12 13 14]

[Orange White NU NU NU NU NU]
[Green White Blue White NU NH Green Orange]

NU = Not used/No wire
NH = No hole

1-2 HD
8-9 PWR LED
10-11 PWR SW
13-14 LAN

The pinouts are in numerical order

1 2 3 4 5
6 7 8 9

Pin signals:

1.Data Carrier detect
2.Rx
3.Tx
4.Data Terminal Ready
5.Signal Ground
6.Data Set Ready
7.Request to Send
8.Clear to Send
9.Ring Indicator

Hello,

Transistors are with just three pins, so what you are seeing there should be an ic and not a transistor.

It is ics that have numerous pins, transistor have just three legs(pnp) or (npn).

So what you see is an ic.

Take care.

DB9 -----------------------------------> RJ45 1 ---------------------------------------> 8 2 ---------------------------------------> 4 3 ---------------------------------------> 3 4 ---------------------------------------> 7 5 ---------------------------------------> 5 6 ---------------------------------------> 6 7 ---------------------------------------> 1 8 ---------------------------------------> 2 9 ---------------------------------------> NC
If not work, invert the RJ45 connector

rate me 5 stars to answer you question

to enable REAR green audio port,there needs to be jumpers between pins 5-6 and 9-10 of J2 which is towards back PCI slot area.If the jumpers are not present, the front panel audio is enabled.

gfexcel  vga drive

here is a link with a pinout and information on each wire for the atx, all you would have to do is run a wire from the green to a black(ground)


http://pinouts.ru/Power/atxpower_pinout.shtml

Here is a common pinout, yours may be different....