VHS VCR is stuck in 'AU' mode

order a remote on amazon

Try the makers website they might have a free PDF of it.

www.ebay.com/itm/Fisher...FVH4900-FVH4903-/220042225726
hello!
That's where you can find the remote control unit.
Good luck,
Alex.

Hi,

The following link has a large list of remote and codes to go with it.

http://www.xdiv.com/remotes/

Regards,
G33k

Some VCR's when switched on and set to a tv station will set the clock automatically.
Otherwise you will need to get a remote for the model or a universal one.

Solved my problem by reading a previous post about taking apart the remote and cleaning the contacts. Believe it or not it the remote is working again.

One of the buttons in front - or the power button itself - may be stuck. Try pushing, tapping, and gently pulling each of them.

Good luck !

Marco

SCA3.0

There may be a combination of keys to press to get it into programming mode. This isn't consistent from remote to remote, probably not even if brand is the same. I'd suggest going to the manufacturer's website, and see if they have the manual posted there, for either viewing or printing. Beyond this, your guess is as good as mine.