Service 8 on Capresso 1300

Jura Capresso Impressa E8 Espresso/Coffee Maker Error 8 ...

www.fixya.com > ... > Jura Capresso Impressa E8 Espresso/Coffee Maker

Jura Capresso Impressa E8 Espresso/Coffee Maker, error 8 related issues. Get free ... We have just done a full disassembly, cleaning, and relube of our Jura Z5 ...

Bosch Benvenuto B30 Espresso/Coffee Maker Error 8 ...

www.fixya.com > ... > Bosch Benvenuto B30 Espresso/Coffee Maker

Honestly, I've never even saw a Jura Capresso Impressa S9 Coffee Maker so excuse me that I won't provide you a specific answer, but maybe I can help you with some generic guidelines. I
According to your description, after 5 years it's presenting some problem.
About German language message, copy it to google search, between quotes and add word translate; see if you get some intelligible return.
Other trick to get a tranaslation is to send text to yoursel with gmail and select "translate"
Depending on content of that mysterious German message, probably you should look for some repair service. Maybe on your original warranty you have a listin of "authorized repair service" or the shop where you bought it can tell you where to take it.

Here is a list with the error codes, hope it helps.


Jura Error Codes Capresso Parts

DISPLAY SHOWS MALFUNCTION 8 Solution: Turn off and unplug machine. Wait a minute. Turn machine on and wait until it stops making any noise. Now try to pull out the drawer. If this does not work, try the procedure again. If this does not work, call customer service
Regards Kat (please leave feedback, many thanks)

Jura Capresso E8 Makes a cup of espresso then makes a gear grinding sound and then throughs an Error * on the screen. Machine was repaired by Capresso a year ago.

You need to open the grinder, it`s probably packed with old fine powdered coffee that blocks the outlet. Clean this out and try again. Since it works normal when you use pre-ground coffee, there shouldn`t be any problems with any other parts.

Let me know if you want a description for have to open and clean the grinder.

Good luck!

CALL our toll free HELP LINE: 1-800-767-3554 Monday -Friday 9AM to 9PM and Saturday 9AM to 5PM Eastern Standard Time. Feel free to call at any time. If you are connected to our voicemail, PLEASE DO NO HANG UP. Leave your name, telephone number and when we can call you back. Please also leave the model number of your Capresso product if you know it (see bottom of product)

FAX us at 1-201-767-9684

E-MAIL us at [email protected]

VISIT our website www.capresso.com

WRITE to Capresso Inc., Customer Service, P.O. Box 775, Closter, NJ 07624

What part do you need?

Used to get the Service 8 with increasing frequency until it almost froze up. Luckily I figured out an easy solution and my 5 year old refurbished C1500 with over 4000 coffees runs like brand new. Here's how:
Take out the grounds tray and reach in to pull back the flap up above where the grounds fall. There is a piston and cylinder thingy behind the flap kind of like a car piston. Take a wad of wet paper towel and shove it up there to clean it out. Then use a dry towel to dry it. Now the secret solution: Take a can of spray pam and point it at the piston and cylinder with the flap pulled back. Give it a couple good shots. Now you just need to get the machine to work that in between the piston and cylinder walls by running the rinse cycle until it frees up. You may have to run it a few times then unplug and let it cool for a couple hours and run it again. The motor overheats if the piston is really stuck so you need to let it cool down. Apparently this is lubricated at the factory with a FDA approved food grease from Dow Corning that needs to be replenished but hey no one is going to die from a little vegetable oil. Some day if it even hints at happening again (It has been 3 months now) I know what to do. Cheers!

check out this link:
http://www.kuntze.de/E/index.htm