Question about Siemens Washing Machines

Open Question

F43 error on my S14-79 Siemens washing machine ? I replaced the motor brushes but cannot clear the error?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 185 Answers

SOURCE: getting error code e:02 on

model number please

Posted on Mar 28, 2008

Ad
  • 1462 Answers

SOURCE: My bosch washing machine wfo2865

remove back panel.remove motor wiring undo two bolts in front. remove belt. motor will pull out.
my experience of these is that often the commutator is damaged hence brushes worn

Posted on Aug 07, 2008

  • 1462 Answers

SOURCE: Where are the brushes?

easiest way is to remove the motor - just held in by simple bolts. disconnect the electrical plug and socket wiring to the motor of course.

Posted on Oct 01, 2008

barkencoa
  • 3463 Answers

SOURCE: remove siemens washing machine motor

You probably need to lever the motor back, as it is probably held in place on the motor mounts.

Posted on Dec 09, 2009

  • 6277 Answers

SOURCE: Hello can you please help

Hi from retired Englishman in SW France,

For Bosch Logixx, F42, F43 and F44 all decode as 'motor fault indicated'. Sorry ;-0)
I changed the motor on our Bosch (not a Logixx) at a cost of GBP250! I do expect it to last another 20 years, though.

If this has assisted you please score accordingly.
Thanks and good luck!
John C

Posted on Apr 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have replaced the carbon brushes in my logixx 8 machine after error code F43 appeared .the machine works ok but the washing stays soaking wet on the wash programmes


Make sure the pump wires have not got accidently dislodged when changing the brushes. Also check the program cycles, you may have accidently selected a "no spin" cycle.

Mar 10, 2015 | Bosch Washing Machines

1 Answer

Errore f43


Check motor connector block
Check motor carbon brushes

Oct 20, 2014 | Bosch Washing Machines

1 Answer

How to reset siemens washing machine?


what model of machine

F40-50 is usually something to do with the door lock interlock

Aug 30, 2014 | Siemens Washing Machines

1 Answer

My Bosch Logixx 8 sensitive won't work and shows the code: F:43


Bosch Logix with error code F43 has "a motor fault".

You can reset the error code by the follow steps:
1. Turn the appliance knob to the off or reset position, 12 o'clock.
2. Turn the knob to the 6 o'clock position.
3. Press and hold the spin button and while holding the spin button turn the knob to the 7 o'clock position. Continue holding the spin button for about 5 seconds then release the spin button and now turn the knob to off
When your turn it back on it should have cleared the error code

bosch-logixx8-washing-machine-motor-rpxi2kdaoxqb2kdbm042ffrw-5-0.jpg



Check motor connector block
Check wiring
Check motor carbon brushes
Check tacho connections
Check motor

Apr 03, 2014 | Bosch Logixx WFT 2806 Front Load...

1 Answer

F43. Terminal?


motor brushes on bosch machines typically last 6-7 years its the first thing to check

Mar 19, 2014 | Bosch Washing Machines

2 Answers

F43


Hi.

If you have Bosch, Baumatic, or any other machine built by Bosch, then F43 is a motor issue:

Error F43 : Motor fault: do an emergency drain through the drain access in the front bottom side (see manual). Open door and check ig the drum rotates free when spin by hand. Disconnect power before performing maintenance.

Regards.

Ginko

Sep 14, 2011 | Washing Machines

2 Answers

My new bosch logixx front loader washing machine (3 weeks old) is showing a flashing error code F:43....what does this mean ? Thanks


I just realised that I don't appear to have a comprehensive list of Bosch error codes, but some quick research tells me that F43 is a motor error, usually associated with the motor brushes requiring replacement (Though they may also be sticking and just require removing, cleaning and re-fitting).

Jun 30, 2011 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Mike

Level 3 Expert

4357 Answers

Are you a Siemens Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...