To change to F to C follow the next steps:
1. Press and hold and the same time (simultaneously) the up arrow and fan button (middle button under the screen) until the display changes.
2. Press next until you see 14 on the left and 0 on the right.
3. When you see the 14 on the left and the 0 on the right, press up arrow to change number 0 for a 1.
4. Then press Done and you will see your normal display in Celcius.
Good luck!
SOURCE: We have a Honeywell A/C
the honeywell is just a thermostat.my guess is the capacitor went out in the condenser when you lost power.turn the temp down on the thermostat and hit the hold button.....if it does not cool,call a service tech.good luck!
SOURCE: I purchased a 2005 home that was vandalized. It
They will work, most zone controls only require the use of 1H/1C thermostats, the system stages and functions are controlled by the board itself.
http://customer.honeywell.com/TechLit/pdf/PackedLit/68-0237.pdf
SOURCE: have a honeywell focus pro 6000 TH6220D1036 and it
get an external thermastat installed and check the internal limit thermostat.
210 views
Usually answered in minutes!
×