F8 malfxn code

F2 Oven Temp Exceeds 590 with unlocked door High resistance in Sensor, likely a bad sensor
Video

Basic error codes for American stoves

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

This is usually a control board failure, but sometimes can be caused by the keypad. There is a procedure outlined in the tech sheet to determine which it is.

best regards,
Bruce
www.fixyourboard.com

Hi


Thanks for using FixYa. Error F7 means that the control panel has gone bad and should be replaced with a new one. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

There was a tag on stove that told on the error codes. Reset pad, it was somehow stuck. Thank you for your help!!

Cheryl

Your ERC(clock) has failed. Replace the electronic oven control.

Call GE answer center 1-800-626-2000 ask for tech help, Have you Model # off you data plate ready.

F3 is Open oven temperature sensor circuit, to fix this you need to read oven temperature sensor circuit at oven temperature sensor ( approx 1000 ohms at room temp); check for cut or pinched wire or loss of contact, if wirings are ok, then replace the probe.

Hi.
Probably faulty element, but you would need to test it to be sure.

F3 is Open oven temperature sensor circuit.
F4 Shorted oven temperature sensor circuit .
F7 Component failure.

To fix this you need to read oven temperature sensor circuit at oven temperature sensor ( approx 1000 ohms at room temp); check for cut or pinched wire or loss of contact, if wirings are ok, then replace the probe.