Question about Samsung YP-U3 MP3 Player
When ive connected by samsung player to the computer and ive gone onto the samsung media studio which ive installed. The portable device icon is not active and does come on.
I had this problem with my YP-U3JZB, and this worked:
Plug player into USB port. Then do: Control panel > System > Hardware tab > Device manager > Portable devices (expand and locate name of device, eg "Samsung YP-U3") – right-click and select “Update driver”, follow prompts.
This worked without installing the Samsung media player – Windows Media Player 10 or 11 will then recognise the device, for syncing, etc.
(found this solution in another forum, can’t now locate – anyway, props to them!)
Posted on Jan 09, 2008
Go in Control Pannel ->Add Hardware -> Next
Then choose Yes, I have already connected the hardware -> Next
Select MTP device form the list (it is somewhere at the buttom) -> Next
And finish the instralation
Then go to Control Pannel -> Portable Media devices and you will see your mp3 player there.
It is now connected to your computer and you can put your music on.
I hope this is the solution to your problem
Green Troll :)
Posted on Dec 10, 2007
This is a common problem that is usually generated by flashing the wrong firmware
to the player. All you need to do is to get your player into ADFU state, that is to make it connect to the pc no matter what the firmware tells it to do. To do that you must
disassemble your player and short the memory chip pins or the tantalum capacitor on the board.
First you must connect the player to the PC and wait 30 seconds. Then
you must short the capacitor's wires with a screwdriver or a bent
paperclip, but only for less than a second. Do not let it short for too much
or you will burn the chips!
Alternatively, you can short the flash chip's pins with a paper clip. Short both sides
and slide down with the paper clip but do NOT insist. Your player should turn off for a
second and then turn on again. I repeat, do not insist or you will burn your player's flash.
Just slide fast, but be care full not to break the pins.
As soon as you do this and the player restarts, after maximum 1 minute it will be detected by your computer and the PC will ask for drivers. Now you have to browse to MP3 Player utilities folder, tipically under “C:\Program Files\MP3 Player Utilities
4.15\RDiskUpdate\driver\” and install “ADFUUD.SYS”. The PC will then install it and you'll be able to run the firmware update program and update the fiwmare.
If you think I helped you then please rate me.
My name is Karatela.
Posted on Dec 05, 2007
Whe I plug in my devise is charges but when I try to sync my music or add songs to my devise it says it is disconnected. So I cannont add music on to it.
Posted on Sep 30, 2008
Its a program your missing that the mp3 needs to work
install the following or higher
-Internet Explorer 6.0
-DirectX Version 9.0c
-Microsoft.NET Framework 1.1
-Windows Media Player 10
Posted on Jan 20, 2008
Can you try a different copmuter?
Posted on Dec 05, 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 15, 2011 | Samsung YP-S2 MP3 Player
May 28, 2009 | Sony Network Walkman NW-HD3 MP3 Player
Dec 03, 2008 | Samsung YP-U3 MP3 Player
Nov 27, 2008 | Samsung Yepp YP-T9 Digital Media Player
Jul 11, 2008 | Samsung Yepp YP-P2 Digital Media Player
May 21, 2008 | Samsung YH-925GS MP3 Player
Dec 17, 2007 | Samsung YP-U3 MP3 Player
Nov 18, 2007 | Samsung Audio Players & Recorders
Nov 14, 2007 | Samsung YP-K3 MP3 Player
17,929 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: