Need to get manual for naps I 3000 spinner - Audio Players & Recorders

there is nothing wrong with having a nap now and again. It can really refresh you in the middle of the day. But if you are napping and then it is hard to fall asleep at night, you should try cutting it out. Also if you find you need to take several naps a day, you should probably get advice from your family doctor.

The belt is stretched or worn. You need to replace the belt. Here is a link to the belts you need and to the manual which has instructions, it's really simple. Hope this helps ya!

Dyson DC07 Belts and Manual

Hold down the mode button until the alarm /radio symbols turn off. (To turn off nap, hold down nap button until symbol disappears.)

I've seen some comments that you can't turn NAP off once it's set.

You can turn off NAP by holding down the NAP button for a few seconds again once the clock has exited NAP set mode and is showing the time. When you first hit the button, it'll go back into NAP set mode (probably showing 0:20) but after a few seconds, you'll go back to the time with NAP off.

Trick is, the button's a little quirky, and you have to hold down just the edge closest to the back of the clock. The middle of the button or any other edge just throws you back into NAP time adjust but never turns it off. I have no idea why--must be a design or manufacturing flaw of some kind.

For the snooze, hold down the snooze button (should display the length of time for snoozing) and hit the time/tune buttons up or down to increase or decrease the snooze time.

For the nap time, press nap and the nap indicator should start blinking. Again, hit the time/tune buttons up or down to increase or decrease the name time in 10 minute increments up to 2 hours.

i press the nap button and hold down the cancel button and it works fine

You have to "double-click" the "NAP" button. And on the second "click," hold it down until the "NAP" light goes off.
That worked for me three times in a row, at least.

Press the Cancel button. While the wake mode LED is blinking (either alarm or radio) press the Wake Mode button. The wake mode LED should now be off. To turn off the Nap function before the alarm sounds, press and hold the Nap button for 3-5 seconds. The Nap LED should stop blinking and be off.

JUST HOLD THE NAP BUTTON UNTIL IT NO LONGER IS BLINKING NAP, dont return it, its very good at waking you up in the morning, and is basically a good alarm clock, it just has a different way of turning nap off.

Like everyone else here I have accidentally hit the NAP button and couldn't turn it off. This morning at 2am I accidentally hit it with my husband in bed. I decided one and for all to guide this out. By flashlight and my cell phone i Googled a solution. I came across many, none of which worked. I resorted to trying methods that were posted for other models of this brand of clocks. The solution that I found that worked was to hold down the back part of the NAP button until the seat the time displayed and the nap light off. By back part of the button I mean hold down the tiny section closest to the rear of the clock. I got this solution from instructions for model RP3721A clock. It took me 17 minutes.That's just 3 minutes before the alarm would have gone off.