User Instruction Manual for a Humax LGB-22DRT TV

You did not mention model of remote control. You can download the required manual for your remote control from following link.

Remote Control Code List ' HUMAX-United Kingdom (humaxdigital.com)

If your Humax 5000t is not finding HD channels during scanning, there could be a few potential reasons for this issue. Here are some troubleshooting steps you can try:

1. Check signal strength: HD channels may require a stronger signal compared to standard-definition channels. Make sure your antenna or cable connection is secure and properly aligned. You can also try repositioning the antenna or cable to improve the signal strength.
2. Perform a full rescan: Sometimes, a full rescan can help resolve channel detection issues. Go to the settings or menu of your Humax 5000t and find the option to perform a full rescan or channel search. This process may take some time, so be patient and allow it to complete.
3. Update the firmware: Outdated firmware can cause compatibility issues and affect channel scanning. Check if there is a firmware update available for your Humax 5000t. Refer to the manufacturer's website or user manual for instructions on how to update the firmware. Follow the recommended steps carefully to avoid any potential issues.
4. Verify broadcast standards: Ensure that your Humax 5000t is compatible with the broadcast standards used in your region. Different countries and regions may use different broadcast standards for HD channels. Check the specifications of your Humax device and confirm that it supports the specific HD broadcast standard used in your area.
5. Reset to factory settings: As a last resort, you can try resetting your Humax 5000t to factory settings. Keep in mind that this will erase all your saved settings and recordings, so make sure to back up any important data beforehand. Look for the reset option in the settings menu of your device and follow the on-screen instructions.

If none of these steps resolve the issue, it's advisable to contact Humax customer support for further assistance. They can provide specific troubleshooting guidance based on your model and help you resolve the problem with HD channel detection.

Question edited for clarity, 'humex' to 'Humax'.
Question moved from Cars and Trucks category.

They make a few models, but here an instruction manual. They can all be found using Google 'make MODEL manual'.
https://manuals.plus/m/0138caa99174c297359582f8a646f28b2f701887be87631db85aed03fd9d43a6

..

https://support.youview.com/youview-box/box-and-remote/sync-remote-to-the-tv

https://uk.humaxdigital.com/support

no power

Go to http://www.humaxdigital.com/uk/products/product.php?gid=442&pid=6

LED LCD TV REPAIR sound but no picture black screen dark picture pt1 check link

have you tried the remote's menu to see if it's on anything else other than TV Broadcast?? the other thing I can only think of is the Tuner/modulator might have suffered electronic damage as a possible result of power surge... I've always suggested that surge protectors should be used on sensitive electronics...

u can get it on internet click here

ct841 is the model of the remote. The model of the TV will most likely be on the back. Once you have the TV model, -->click here<--, this is the site to download the info you seek.

please take the time to give this solution a fix ya rating.

clarkco