How do I add new string to my black and decker st6000

Replacement Black & Decker LBX2040 Cordless Drill Battery
Type: Li-ion
Volt: 40V
Capacity: 2500mAh
Color: Black
Weight: 1250g
Dimension: 182.88 x 86.36 x 149.86mm

Please go to view more about this battery on http://www.drill-battery.com/buy.php/black+&+decker_LBX2040_drill+battery.html

Couldn't find one. Might this one serve?

http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0CDIQFjACahUKEwi3s7mfpIvGAhVRMowKHbmUAP0&url=http%3A%2F%2Fwww.ehow.com%2Fhow_7484314_thread-black-decker-st6000.html&ei=wWd7VffOFtHksAS5qYLoDw&usg=AFQjCNFL3IyFWdUOOtb62OxVuFd6dzbi7Q&sig2=mPBwzo9n_QxBGoVh_P5efg&bvm=bv.95515949,d.cWc

ensure the spool is not ended if so replace with new spool of string. also check the retaining screw in the middle is not too tight. undo it one click at a time to alow the spool to unwind when the motor runs

always disconnect your strimmer from the power when doing this also wear protective footware and long trousers, when using such tools.

Hi,

I have a touch feed trimmer also. I've found that when the string doesn't come out, there is usually a twist in the line inside on the bobbin. Open it up and see if the line needs to be straightened out. Sometimes I've had to rewind for a bit.
Before you do that, be sure you are bumping it hard enough. Mine needs to bumped on a pretty solid surface.

Hope this helps. If it does, I'd appreciate a vote. Thanks,

Handie Andie

Hi,
Try this out...

http://www.ehow.com/how_4914620_restring-black-decker-weed-eater.html

heatman101

Is the string spool seated on the rachet correctly? If so and all is well, it is worth noting that these trimmers auto feed fuunction is problematic at best, requiring manually unwinding some line every few minutes as the unit gets older.

The push lock on the string feeder Is sticking. Pull it off, clean it out and put it back on.

good luck

The ST6000 uses centrifugal force. Once you mount the new spool of string and thread it out of the feeder and into the housing below, plug it in, give it power and hold the line feed button down, feeding the line. Within seconds, the line will feed out through the head and you'll be in business.

I went to the B&D web site and downloaded the manual for this unit.
Here is the link

http://www.blackanddeckerservicenet.com/Products/ProductManual.aspx?q=8209

see www.dewaltservicenet.com, www.toolpartsdirect.com or www.ereplacementparts.com all info you need