Canon IR 3100 CN needs pasword

canon ir 6800cn error code e000100-0002 solution

E805 fan error
Description
With the ITB fan in operation, the machine does not detect a lock state for 5 sec continuously.
Remedy
Turn off the main power, and check the DC controller PCB; then, turn the power back on.
Remarks
Disconnected fan connector; absence of lock signal because of fault in fan.

You have to seize the RID master for you domain, appears to be removed from network or can't be contacted, you can use the next commands in order to get the actual (MYSERVER should be replaced by the name of you server

C:\WINDOWS>ntdsutil
roles
connections
connect to server MYSERVER
q
Select operation target

then you get the next response:

Server "MYSERVER" knows about 5 roles
Schema - CN=NTDS Settings,CN=MYSERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=MYDOMAIN,DC=net
Domain - CN=NTDS Settings,CN=MYSERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=MYDOMAIN,DC=net
PDC - CN=NTDS Settings,CN=MYSERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=MYDOMAIN,DC=net
RID - CN=NTDS Settings,CN=MYSERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=MYDOMAIN,DC=net
Infrastructure - CN=NTDS Settings,CN=MYSERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=MYDOMAIN,DC=net
select operation target:

the interested server is RID - this must be the name of a actual server, if this server is permanently down the you need seize the rol, use the next guide:

http://technet.microsoft.com/en-us/library/cc784077%28WS.10%29.aspx

if the server is an actual server you must review the event log in this server in order to get more clues of the error.

canon ir 3100 error code E00070-003

E000007-0000 code is Fixing Film error.
FM2-3346-000
1 FIXING FILM ASSEMBLY 120V
FM2-3353-000
1 FIXING FILM ASSEMBLY 230V EXCEPT CN
FM2-3329-000
1 FIXING FILM ASSEMBLY 230V CN

The E00070-000 is not a ITB problem, but a full wastetoner. Open the front cover find the white bottle in the middle, remove the black screw, remove the cover over the top of the bottle and empty the bottle. Be sure to clean the top of the bottle so the sensor can see that the bottle is empty. Restart the copier.

Change the printer properties setting on the computer from Normal or Draft where it is not to Best. That'll fix you up.

hi..there...you may visit canon website at internet..chose product support/dowlnload----find your product here and finally you can get and download manual book as pdf for free....good luck..

the hard drive containing the software that drives the machine has an error. Corrective steps would be to contact to a Canon technician, who can first try to re-install the software, and if this doesn't work the hard drive has probably crashed, meaning that the drive will need to be replaced and the software re-installed

HP Photosmart C 310series-driver Vindows Vista