Jura F9 repair needed

https://www.jura.com

depends on the wattage of your converter..if its a coffee machine, you need a larger converter that will handle the wattage needs of the coffee machine..say if its a 1200 watt unit, you easily need a 1500 watt converter..I lived in germany 3 years..our stereos were 110.. we used huge converters some in exess of 50,000 watts(huge sound system)its a math thing..usually you will need 10% more converter for the wattage size of your appliance..

possibly better posted in another catagory other than pc desktops

Hi, a video how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Apparently after a few yrs of use the steam wafting up from a cup of coffee works its way into the electronics touch screen mechanism causing it to turn on by itself...since moisture is such a good conductor for electricity it seems like there is a "ghost in the machine"...credit "The Police" band for that quote...my simple solution was a 6-7 dollar desk fan purchased from Walmart and point it up across the front of the unit...problem solved!...just keep the fan running while you use the unit and save a bundle of $$ not having to send it back to Jura!...Bob in SC

Hi, Sounds like a sencor on the boiler is faulty. It needs to go into the repair shop. you cant buy parts for Jura. You have to use an autherised repairer. Not many Jura repairers around. Im a repairer based on the sunshine coast Qld. Dazza

yes read book follow list in order

machine is most likely clogged with old coffee grounds and needs a good cleaning cycle malf 8 is problem with the stoke of the piston can not make a complete cycle thur get your book out for machine and read list for cleaning machine follow remove power cord for a few mins. let machine cool down if hot from prior use then plug back in power up and do cleanning cycle with tablet follow book worst case would be oring seals on piston are no good or very dry making machine work to hard to move piston in this case service is needed good luck steve

Kris I have this same problem. Did you figure out how to replace the flap or did you have to take it in for repair.
Does anyone else know how to replace this plastic flap?

The only sources I have been able to find are in Europe. They do not always wish to ship to the US however. In the US the dealers always want the repair, but seldome wish to sell parts outright. Try this website for parts.

Mike

www.juraprofi.de