Black and decker site tool repair shops or online search about 100 hits with prices for it this is one of the first sites https://www.ereplacementparts.com/collet-nut-p-99639.html?gclid=CjwKCAjwsIbpBRBNEiwAZF8-zzQRptPzxj-spCrPNPRd_CyXMMEXjAPyR_lXQKvHv4-QY-r1VE4Z8hoC9csQAvD_BwE
SOURCE: i have a rotary wizard and no instruction book.
If this is a Black and Decker you can go to Dewaltservicenet.com and find a manual there usually. If not there is a phone number that you can call and probably get one.
SOURCE: Kawasaki Rotary Tool is missing the square collet nut
I am working on getting a website for this company, but you can try Alltradetools.com and see if they have anything, they distribute them.
SOURCE: I have a Canadian tire model 55-3550-2 belt/disc
I went to a bearing/powertransmission supplier. The number on the belt was all they needed. Picked up a new belt for $6.50.
SOURCE: Can't find replacement collets/locknut for PowerSmith rotary tool
Hello Bob, I recently saw your post about the Power Smith PS2103. I have this same tool, and have never been able to use it because the collets don't fit the bits.
I was looking at it recently - I have the owner's manual - and although there is no web address, there IS a toll free help line. Here is the number - 888-552-8665
I called the number - got their voice mail, left a message, but they have NOT returned my call!
The only outlet that MAY carry this brand is Zellers, but I haven't been there yet.
Good Luck!
Bob (in Canada)
[email protected]
SOURCE: I have a Durabuilt rotary tool model S1J-FE2-10
I have the same problem with mine. The collet nut that came with it is too big. It wont screw down to hold the collet. I am searching for a new nut.
188 views
Usually answered in minutes!
×