Area Code not showing on incoming calls. Sakar HT44ID-10

The 1 signifies it is the US. Whether you dial a 10 digit number or 11 by adding the one yourself the call is made with the 1. It's hidden if it doesn't show. Because cell phones are mobile they require all 10 digits unless you are using assisted dial which will recognize your location and enter the area code and then allow you to just dial the prefix and last 4 digits.

You want the call to go through no matter where you or the person you are calling is located.

Mark
Motorola Support

If the phone locked to a particular network then you need to unlock the network lock. You can get the unlock code through online. Give your IMEI number & get the unlock code for ur mobile .............You also get through online..........I will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.

• 011 - US exit code; must be dialed first for all international calls made from the USA or Canada
• 92 - country code for Pakistan
• area code - 2 - 3 digits
• phone number - 6 - 7 digits; area code + number total 9 digits

Area Codes

If they're calling from the same area code that's set in your "Global Setup", then the area code won't show.

Where I live, you have to dial the area to call them back, so I set our area code in the phone's Global Setup to 000.

That worked and now I can scroll through caller ID, see the whole 10-digit number, and return all calls (w/area code) with no problem.

Hope that helps!

try entering the area code as well or if you have area codes with the numbers delete the area code

In order to send a text message on the iPhone, you must have the entire 10-digit phone number in your phonebook. For example. If you are trying to send a text message to the phone number 555-1234, you must also enter the area code. If the area code it 412, you must put in 4125551234 for the phone number.

Hope this helps!!

Somewhere, like on pdf page 48 there's a note about 7 digit dialing. In MENU GLOBAL SETUP AREA CODE it displays yours. Press DELETE and OK and it goes away.

Here's the manual: http://www.uniden.com/pdf/TRU9488om.pdf

Carl

if you are putting 1 then the area code , just put in the area then the number and nt the 1 digit this should help

So the number issue, the area code here on appleton Wisconsin is 920 but there are some cities that are still long distance in the 920 area code like Green Bay which is only 20 miles from here (GO PACKERS)

you probably got a number for a different city in the same area code, maybe they didnt have numbers for your city?

As for incoming calls, did you try resetting the phone? if so, call helio and tell them you want to reprogram the phone, they will send a programming code to the phone. Mine did this for 2 days when it was new, i called and they got it straight for me, if you still have the box, call the activations line and not customer service, you will get through faster.

You have stored the persons name and number in the SIM memory, that is the fault- if you want to see their face and number, then store to phone memory..