Question about Dacor ECS130 Epicure Electric Single Oven

1 Answer

Dacor oven beeps and shows F1 code

This recently started. I've tried pushing all the "off" button, but the beeping persists. Suggestions, please?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dacor Master
  • 8,220 Answers

-F1- Alarm “System Watchdog Circuit”
The system will detect a failure in the internal watchdog element relay circuits and will activate a
cancel feature. F1 will be displayed in the time digits and will beep until the cancel button or another
function is selected. An F1 failure could be detected in cook or time of day mode. With an F1 failure
the ERC is picking up a command to supply heat without receiving an input from the membrane. The
watch dog circuit is designed to prevent this.
If the beep continues after pressing cancel check the main control (ERC)
Dacor


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Posted on Aug 20, 2009

  • 2 more comments 
  • Dan Webster
    Dan Webster Aug 21, 2009

    Here is a pdf of your manual DACOR WALL OVENS

  • nukeweldor Oct 15, 2010

    Thanks for the manual -YOU ROCK!

  • Dan Webster
    Dan Webster Oct 16, 2010

    Anytime amigo

  • Beachbum92629 Dec 01, 2012

    How can I get a copy of the manual? It would be nice if I can get by with unit for 1 more year. Can I do this myself?

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Start button says push & beep never starts


you have to push the bake or broil button first then set a temperature in it it is not a smart oven you have to give it directions

Nov 05, 2015 | GE JTP15 Electric Single Oven

1 Answer

Oven won't start


Try pushing the "convection oven" or "bake" button first, then enter the temperature you want. Then "Start".

Sep 24, 2012 | Thermador SC272T Electric Double Oven

1 Answer

Gibson oven door is locked after attempting to do self-cleaning.


Unplug it. Plug it back in, then press n hold start. Make sure lock handle is all the way locked. You may have to push on the door at same time while locking n unlocking. If that doesn't work, shoot it. Ha

Sep 24, 2012 | Ovens

1 Answer

Oven is beeping and showing f1


Hello Charlie,

The F1 error code means that the computer thinks a button on the touchpad is stuck. Sometimes this can be resolved by making sure the touchpad connector fits tight into the control board. The F1 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced

GENE

Nov 06, 2011 | Neff B1421 Electric Single Oven

1 Answer

Got F9 on Amana range model ACS3350 while trying to clean oven. The door is locked and got constant beeping with F9 error code. Powered off oven for 10 minutes and powered on, still getting the door...


Shut off the circuit breaker to it for FIVE minutes, then back on. If the problem persists then do the following:

A latch locks the center top INSIDE of the door during cleaning.
Run a piece of semi-stiff, flat object, like a cardboard strip that is in L shape behind the top lip of the door from RIGHT TO LEFT. You may need to push it along with your finger jambed in there when it reaches the latch. With a little push the latch should open.

Try to run the oven, if F9 shows again, press cancel Oven to quiet it. The Lock state is still in place. Move the latch hook manually all the way to RIGHT. Then shut off the circuit breaker for FIVE minutes, then back on. The oven should work ok.

If this fails again try the five minute shut off with the latch in other starting positions.

If none of these work then the latch mechanism, or it's motor is really broken. Replace or ditch and never buy Amana again!

Sep 01, 2011 | Amana AOCS3040SS Electric Single Oven

1 Answer

Self Cleaning Amana wall oven installed in late 1999 Has worked very well until recently when buttons are pushed to do bake, broil, time etc it won't work when time button is pushed to start. What is...


TRY THIS... If the buttons are "stuck", the glass panel may have shifted to the right or left causing the holes in the glass (through which the button protrude) to rub against the glass. VERY CARFULLY try to shift the glass so the buttons are centered in the holes.

Oct 31, 2010 | Ovens

1 Answer

I have a Dacor ECS130 and when we turn it off the F1 code comes up and it beeps forever. i tried uplugging the membrane switch from the control/clock module (with the power off) and there is no F1...


Hi


Thanks for using FixYa. Error F1 in your Dacor Oven indicates element relay circuit failure. To resolve this issue the control board should be replaced as it has gone bad. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 26, 2010 | Ovens

1 Answer

Our oven started randomly beeping last night with an error message of what looks like "F1" and when we push a button it stops for only 5 minutes then starts up again. Any suggestions on how to get it to...


Hi. This Usually means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be canceled, replace the oven control (also called clock or ERC), touch pad, or both.

Dec 08, 2009 | GE Ovens

1 Answer

Oven comes on for 5 min then shuts down everything even the keyboard


Same problem here on JKP15WOW1WW. The cycle starts like this:
1) Open circuit Breaker
2) Open oven panel and push ribbon connector to ERC. Replace planel.
3) Close circuit breaker
4) Run to oven, notice clock flashing some time but not 12:00 and start Bake. Bake button beeps and starts bake coil.
5) Within 5 minutes hear a beep and all buttons on panel are unresponsive. Bake continues. if oven light is on it continues to glow. Only button that responds with a beep (and not to clear bake or oven light) is Clear botton.
Rinse..wash..lather...repeat...

Nov 11, 2009 | GE JKP15 Electric Single Oven

Not finding what you are looking for?
Dacor ECS130 Epicure Electric Single Oven Logo

3,620 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Tyler T

Level 1 Expert

35 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Paul Bade

Level 3 Expert

1662 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...