HP C6280 Error: Ink Cartridges Empty BEWARE SPAM NUMBER 1-800-532-4187

Did you remove the protective cover / tape, you re put the cartridge.

remove all cartridges and close the lid. Wait for "ink cartridges missing..." error to appear then install all cartridges and close the lid. If the error persists, remove all cartridges then clean the cyan chip and corresponding contacts in the printer with damp cotton bud. Dry well (with dry c/bud) then fit cartridges back in. If still no good, contact HP.

hope this helps

LC1000
www.inkbank.com.au

Hi,
As the printer was bought in the US the printer is meant to use the #02 cartridges.

When you decided to replace the empty cartridges with refilled ones…the place you took them to be refilled more than likely decided to replace the little chip with a local flavour, which attempt to mimic original HP cartridges #363 (or what ever the number of those cartridges is where you are now). Hence now they are rejected by your printer.

But because the printer is only designed to use #02 cartridges it will reject every other cartridge/chip that do not have an #02 programmed into them….

You could try to call HP and explain them your situation and see if they can help you reset your printer to accept a different cartridge number …

Cheers.

Dear Sir,

Printer doesn't identify the ink accurately all these are controlled by software only.So it is showing your black cartridge is empty but trace amount of ink actually remained,by this you are getting black and white prints correctly.After the consumption of that trace amount of ink it may print black text as a greenish-brown because printing taking place only by means of color cartridges.So if you observed blurred text or greenish-brown text, now you can replace your ink cartridges.

i think it helps

good luck

hello,,, maybe your problem is found the cartridge due to saying the cartridges is missing or empty
try to put the cartridge into other printer same your printer model of even not same but same size,, to prove it is not your cartridge problem......... i think your cartridge something have a damage


thank you hope i can help you... have a good day!!!!!!!

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01135910&lc=en&dlc=en&cc=us&lang=en&rule=20668&product=3194498


just follow this link and ur problem will be resolved

This is likely a cartridge problem except if the carriage is not moving at all. If you still have some of the used cartridges you can used them to trouble shoot by elimination ok. Or contact a nearby technician who has the cartriges to use them for trouble shooting. I strongly believe the one of the print carts is the culprit. Good luck

slowly off and on the printer for five times without cartridge, printer saves data of cart of last 5 only so next time it reads full ink..

HP C6280 reset:

Reset the All-in-One to the factory default settings by using these instructions:
1) Press Red Eye Removal & Print Photos button simultaneously
2)Enter Special Key Combo is displayed on the screen.
Press and release in sequence "Red Eye Removal", "Print Photos", "Red Eye Removal"
Display should say "Support" and display the FW rev XXXXX.
3) Press Right Arrow button until "Reset Menu" is displayed. Press OK.
4) Press Right arrow until "Semi full Reset" is displayed.
5) Press OK.
Now, check the functionality of the All-in-One.



If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

First make sure you are placing the right
color cartridge into the right slot.
Most Printers are touchy about the
installation of ink cartridges. If the
instructions say to press the cartridge
into the slot until you hear a loud click,
that's what they mean. If at first you
don't succeed, remove the cartridge and
reinsert it into the slot again and press
on it hard till it clicks.
Then your printer should work properly.
Hope this is of some help. Bud