My washing machine filled with water and then stopped mid cycle and it was beeping. I tried the power button the washing machine and it would not turn off the washing machine, it just keeps beeping and the lights flashing. I have now taken out the clothes and removed the water that was in the machine and pushing the power button but it still wouldn't work. I have turned it off at the power point but it still will not work just beeps and nothing else. Please help if you can, willing to try anything. Thanks fisher & paykel ecosmart washer just stop working with 3 leds lit up ( wash -2 middle 3rd and 4th leds and spin led still lit up... no power led lit up) i tried to run diagonitc program on it by turning on power/washdown then spin up.. it doesnt workat all...pleas help thanks
The Error code you have is 110
Here is info on fault code 110
110. (01101110) Motor Bridge Thermistor Open Circuit
The motor bridge thermistor has been detected as open circuit. This means that the Motor Control Module can no longer monitor motor bridge temperatures. This suggests that the motor bridge thermistor has been damaged or removed from the PCB.
Primary Source: Motor Control Module.
Action: Replace Motor Control Module.
Check the wiring harness, connections, contacts, etc. Look for some corrosion and loose connections. Also, check the water inlet for anything that may cause a reduction in water flow.
A very common fault on washing machines is when the program timer fails to complete the cycle and stops part way through. Many people blame the program timer for this but although it is a possible cause, there are many more likely causes for this fault. The program will stick if the heater isn't working, if the thermostat fails, if it can't fill up with cold water for the rinses, if it can't empty the water etc. There are too many possible causes of this fault to be able to give anything other than rudimentary advice. However, the common causes of a washing machine sticking that can easily be fixed are filling and emptying problems.
A very common fault on washing machines is when the program timer fails to complete the cycle and stops part way through. Many people blame the program timer for this but although it is a possible cause, there are many more likely causes for this fault. The program will stick if the heater isn't working, if the thermostat fails, if it can't fill up with cold water for the rinses, if it can't empty the water etc. There are too many possible causes of this fault to be able to give anything other than rudimentary advice. However, the common causes of a washing machine sticking that can easily be fixed are filling and emptying problems.
A very common fault on washing machines is when the program timer fails to complete the cycle and stops part way through. Many people blame the program timer for this but although it is a possible cause, there are many more likely causes for this fault. The program will stick if the heater isn't working, if the thermostat fails, if it can't fill up with cold water for the rinses, if it can't empty the water etc. There are too many possible causes of this fault to be able to give anything other than rudimentary advice. However, the common causes of a washing machine sticking that can easily be fixed are filling and emptying problems.749 views
Usually answered in minutes!
×