I dropped my camera and it will not completely power up. Is there anything I can do to salvage it?

hi.
try this link might help you out.
Canon ZR80 Mini DV Digital Camcorder cassette stuck inside Google Search

go to a local salvage yard like pick and pull or u pick it and ask if they have a switch and you can usually get them for 20 or 30 bucks. that is the cheapest way to repair the bad switch

the only way to fix it is to take it to a professional

Well the screen may have took damage is it ruined completly no it may be savageable try pluging ub a monitor on the external vga plug to see if you see any thing on the external screen. I think the labtop can be salvaged

Thanks please do leave postive ratings for your free answer today.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Unfortunately, this unit is beyond hope. I would, however, try to salvage the memory card, especially if there are pictures involved.

i dropped my t200 camera on tile touch screen was crack what is soluation

I recently accidently dropped my 602 in water and managed to take out all the aa sized batteries out of the camera with the exception of the internal battery which I could not access shaking out all of the water I left my camera to dry out for three days then I tried it to see if it worked but the was dead is there anything else I can do to revive my 602 other than taking it to get fixed and finding out that I have to discard my camera

The moror mechanisn is very fine - it takes little to damage it- a simple bump, other bits 'n pieces in the pocket. Check out Olympus - but I reckon - new camera.

If you drop it this it is one of two: 1) A hardware component in your Camera is broken and need to be replaced. 2) A small power surge caused the camera Controller not to be recognized. You should send it to maintenance as soon as possible to determine what exactly happened.