Can't pair TDK BT-100 headphones to my Iphone

Read the manual and pair it. Very simple. I wrote this a while back.
Pairing Bluetooth Devices
Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks.

Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is.

Roughly speaking though.

Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever.

With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically.

When the Android device recognises it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes).
Posted by ADMIN... on Nov 19, 2016

• Helpful 0
• Not Helpful
• Comment

Pyle Pro PWMKRDJ89BT User Manual - ManualsLib

https://www.manualslib.com > ... > Speakers
View and Download Pyle Pro PWMKRDJ89BT user manual online. Active PA Wireless BT Streaming Loudspeaker. Portable Stereo Speaker System, Karaoke Microphone .


.

How to pair Bluetooth headphones to IPAD?
Most headsets have a power button or a switch to turn the device on. Press the "Pairing" button on your Bluetooth headset, if necessary. Select your headset from the Devices list on the iPad's Bluetooth window. Enter the passkey or PIN for your headset, if prompted.

Does the iPad Pair With Bluetooth Headphones? ' Chron.com

smallbusiness.chron.com/ipad-pair-bluetooth-headphones-62883.html Search for: How to pair Bluetooth headphones to IPAD?

Pair your device with a Bluetooth accessory

1. On your iOS device, tap Settings > Bluetooth. Stay on this screen until you complete the steps to pair your accessory.
2. Place your accessory in discovery mode and wait for it to appear on your iOS device. ...
3. Tap your accessory to pair.

Set up and use third party Bluetooth accessories

Should not be a problem. If you download the quick start guide from this site and follow the pairing instructions for your Bluetooth phone that should work well.
http://www.jbl.com/images/media/J46BT_QSG_EN.pdf

If you do not have instructions for Samsung Illusion then you can follow page 83 for pairing bluetooth in the manual from this site.
https://www.pagepluscellular.com/media/34912/Samsung_SCH_I110_Illusion_English_User_Manual.pdf

If you have a Kindle Fire or later this is possible. Any Kindle before this model has the hardware for BT, but not any method to access the BT (bad on Amazon\'s part, but that\'s the way it is).

Kindle Fire do this: Go to settings --> Wireless --> Bluetooth Turn on Bluetooth if it is not on.

Now on your headset put it in pairing mode. Instructions on how to do this should have come with your headset. Once in pairing mode press Pair a Bluetooth Device on your Kindle. Your Kindle should "see" your headset and list the name of it under PAIRED DEVICES.

You only need to pair the device once. Then you should be able to press the device name and if the device is near by and on it should connect to the Kindle.

HTH

How am I supposed to know what headphones or what device you are trying to pair them with?

Try resetting the headset: When plugging in the AC charger, hold the power/pair button down. The headphones will show a solid red or blue light when they have been successfully reset.

Good luck from Headsets Direct - 800-914-7996.

A faster solution is to plug in the charger for a second and that will reset the led.

pin code 0000

put the music player on and press down on the jogwheel, select 'Play Via' and change it to Bluetooth stereo headset. It'll prompt you to open the swivel and take you to the bluetooth devices screen where you select the correct device, it'll then prompt you to close the swivel and will start playing through your headphones :-) Is that what you mean?... It's a bit of a pain really :-(