Problem with a water dripping Air Conditioner.. I bought a New Plasm Aire Conditioner, Model Number: 580.750652500 last year and it was working great. Now this year I installed it and it continues to drip water from the front of the unit all the time and on all the mode settings. What is wrong with it and how can I stop it from dripping?

Open the front gril from side by side and find out in right hand corner there is water out late . try to clean it and close the front frill .hope problems will be solve

Try Sears Beta Parts

Remove the front cover of the window unit to access the model number location.

Yesterday I went to my sisters house. Her ac's fan was not on. I took some side cutters and make a hole big enough to reach inside and turn the condenser fan on the back side of the unit. I added some HVAC oil to the motor. Don't know how long it is gonna work but it is working now.


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

The outside setting is for bringing in the out side air,the closed keeps the air from the ac circulating and closes outside air off.The unit needs to be remove and took out side and cleaned out with a water hose,dirt and debris is keeping it from dripping out side,

accumulating water is as you assumed - the air conditioner is taking the humidity from the space and the water is nothing other than condensation. I would not worry about it at all.

You need to start worrying if the unit 'doesn't' produce water.

You need to reposition it to where the rear of the unit is tilted slightly down. So that the water will run down and out the rear.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

if the compressor runs for a short time only it could be overheating due to a lack of refrigerant i would suggest finding a contractor who specializes in hampton bay to take a look at it

If there is strong air flow blowing into the house the sq. cage should be OK. Possibly you need to replace the pads and make sure that the pump is not clogged and is distributing enough water to keep the pads wet.

I also have this problem is there a solution to this

Hi Baygirl, you didn't say what model you have, but you can normally find the codes explained on the manufacturers web site. UYou shoulda bought 1 with a remote though - I hate getting off the sofa